Anbull SH-3 Magnetic Stirrer with Hot Plate & Magnetic Stirrer Bar, Stirring Speed 100-1600RPM, Max 380°C, Dual Control, for Lab Liquid Mixing Heating (3000ml)

【Package Includes】 Set includes: 1 x Magnetic Stirrer, 1 x Fuse, 1 x Stirring Bar, 1 x Power cord, 1 x Support stand (base rod, extender rod, right angle clamp and thermometer holder) 1 x User Mannual

【Max Capacity & Max Speed】 Magnetic stirrer hot plate boasts a capacity up to 3000 mL and stepless speeds that range from 100 to 1600 RPM and speed fast, for premier support.

【Magnetic Stirrer Plate】 Voltage 230V, heating power 500 W, Max temps 380℃, 6.7 x 6.7 inch heating plate, fast warm-up and durability.

【Widely Application】 Used in industrial, agricultural, medical and health, scientific research institutions, colleges and universities laboratory liquid mixing heating, heat magnetic stirrer have a large heating plate and dual control.

【Additional Accessories】 This lab hot plate stirrer magnetic comes with a Teflon coated stirring bar and a support stand with adjustable thermometer holder extends above the hot plate surface.The size of the stirring bar is 1 inch.

size:

3000ml

Retail Price: $ 126.99

Wholesale Price: Inquire Now

Usage Details:

To use the magnetic stirrer:

Drop the stir bar into the solution and let it settle.
Turn on the magnetic stirrer by flipping the power switch on(-),then rotating the left knob in a clockwise direction.
The further you rotate the knob,the faster it will spin to stir your solution.
To turn off the magnetic stirrer,rotate the knob counter-clockwise until you hear a click and the white mark is pointing down.flip the power switch off.unplug the device.
Remove the stir bar with a metal utensil.the stir bar will stick to so you can lift it out easily.

To use the hot plate:

Make sure the konbs are turned off.the white mark on each knob should be pointing down.
Connect the power cord to the back of the base.the base should be set on a hard surface,like a countertop or table.
Plug the other end of the power cord into a standard outlet.make sure the outlet is safe and the power cord is not twisted.
Filp the power switch on the right side of the base.the line(-)indicates on and the circle(o) indicates off.
Rotate the right knob in a clockwise direction.at maximum power th e hot plate will take around 20-30 minutes to boil a large beaker of water.the surface in the middle of the plate can reach 350℃(662℉)when the knob is turned all the way to maximum power.
Adjust the knob to keep the desired heat level, using a thermometer to check the temperature of the solution.
To turn off the hot plate,rotate the knob counter-clockwise until you hear a click and the white mark is pointing down.
Make sure both knobs are off and the filp the power switch off. unplug the cord from the outlet by pulling on the plug, not the cord.

Describes:

Features:

Liquid can be heated and stirred at the same time on the machine.
The housing and upper cover of stirrer are made of high quality metal material for durability.
Designed with fully enclosed heating plate, no flame, heating up fast. The heating power and stirring speed are stepless adjustable.
Suitable for industrial, agricultural, medical and health, scientific research institutions, colleges and universities laboratory liquid mixing and heating.

Operation Steps：

Put the magnetic stirrer onto the workbench and plug in.

Turn on the stirring swtich colckwise to set the stirring speed you need.

Turn on the heating switch colckwise to set proper power

Package Includes:

1 x Magnetic Stirrer
1 x Fuse
1 x Stirring Bar
1 x Power Line
1 x User Mannual

Fix Bracket Orifice

Effectively fix the bracket and support the bracket to facilitate subsequent heating procedures.

Power Port

Plug the power cord into the power port to maintain the normal operation.

Power Switch Button

Push the switch, the whole agitator can be operated to heat the product that needs to be heated. Ensure that the heating sequence is carried out.

Black Silicagel Base

The base made of good material silicagel base can fix the entire magnetic stirrer on the console, and avoid the shaking caused by stirring.


	SH-2/2L	SH-3/3L	SH-4/5L
Model	SH-2	SH-3	SH-4
Work Plate Dimension	4.7 x 4.7 inch	6.7 x 6.7 inch	7.5 x 7.5 inch
Weight	5.1 LB	8.2 LB	11.5 LB
Voltage	220V/50HZ	230V/50HZ	240V/60HZ
Heating Power	180W	500W	600W
Stirrer Motor Power	10W	20W	30W
Max Stirring Quantity	2L	3L	5L
Speed Range	100-1600 RPM	100-1600 RPM	100-1600 RPM
Heating Temperature Range	350℃-380℃/662℉-716℉	350℃-380℃/662℉-716℉	350℃-380℃/662℉-716℉
Package Dimension(LxWxH)	10.2 x 7.1 x 6.7 inch	12.2 x 9.1 x 8.3 inch	15.4 x 9.6 x 8.7 inche

APPLYCATION

Notes:

Please avoid using metal containers that do not have a perfectly flat bottom.

When stirring viscous liquids, please reduce volume and stirring speed.

Pls be careful with the hotplate turned on. Don't touch the aluminum surface as it gets very hot and can cause severe burns.

The above measurement data is manual measurement, there will be an error of 0.1-0.5mm, the data on the picture is for reference only, the specific details are based on the actual product.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Anbull SH-3 Magnetic Stirrer with Hot Plate & Magnetic Stirrer Bar, Stirring Speed 100-1600RPM, Max 380°C, Dual Control, for Lab Liquid Mixing Heating (3000ml)

BEST SELLERS

Product introduction

Shipping Notices

【Specifications】: Model: SH-3 Item Condition: New Voltage:230V Stirrer Motor Power: 10W Heating Power: 500W Maximum Heating Plate Temperature: 350℃±10% Stirring Speed: 100-1600 RPM Stirring Capacity: 3000ml Plate size: 6.7 x 6.7 inch 【Features】: The housing and upper cover of stirrer are made of high quality metal material for durability. Liquid can be heated and stirred at the same time on the machine. Designed with fully enclosed heating plate, no flame, heating up fast. The heating power and stirring speed are stepless adjustable. Suitable for industrial, agricultural, medical and health, scientific research institutions, colleges and universities laboratory liquid mixing and heating. 【Package Includes】: ★ Magnetic Stirrer x 1 ★ Fuse x 1 ★ Stirring Bar x 1 ★ Power Line x 1 ★ User Mannual x 1 【Operation Steps】: Put the magnetic stirrer onto the workbench and plug in Turn on the stirring swtich colckwise to set the stirring speed you need Turn on the heating switch colckwise to set proper power 【Notes】: ▲ Pls be careful with the hotplate turned on. Don't touch the aluminum surface as it gets very hot and can cause severe burns. ▲ Please avoid using metal containers that do not have a perfectly flat bottom. ▲ When stirring viscous liquids, please reduce volume and stirring speed.

Product Description

Usage Details:

To use the magnetic stirrer:

Drop the stir bar into the solution and let it settle.
Turn on the magnetic stirrer by flipping the power switch on(-),then rotating the left knob in a clockwise direction.
The further you rotate the knob,the faster it will spin to stir your solution.
To turn off the magnetic stirrer,rotate the knob counter-clockwise until you hear a click and the white mark is pointing down.flip the power switch off.unplug the device.
Remove the stir bar with a metal utensil.the stir bar will stick to so you can lift it out easily.

To use the hot plate:

Make sure the konbs are turned off.the white mark on each knob should be pointing down.
Connect the power cord to the back of the base.the base should be set on a hard surface,like a countertop or table.
Plug the other end of the power cord into a standard outlet.make sure the outlet is safe and the power cord is not twisted.
Filp the power switch on the right side of the base.the line(-)indicates on and the circle(o) indicates off.
Rotate the right knob in a clockwise direction.at maximum power th e hot plate will take around 20-30 minutes to boil a large beaker of water.the surface in the middle of the plate can reach 350℃(662℉)when the knob is turned all the way to maximum power.
Adjust the knob to keep the desired heat level, using a thermometer to check the temperature of the solution.
To turn off the hot plate,rotate the knob counter-clockwise until you hear a click and the white mark is pointing down.
Make sure both knobs are off and the filp the power switch off. unplug the cord from the outlet by pulling on the plug, not the cord.

Describes:

Features:

Liquid can be heated and stirred at the same time on the machine.
The housing and upper cover of stirrer are made of high quality metal material for durability.
Designed with fully enclosed heating plate, no flame, heating up fast. The heating power and stirring speed are stepless adjustable.
Suitable for industrial, agricultural, medical and health, scientific research institutions, colleges and universities laboratory liquid mixing and heating.

Operation Steps：

Put the magnetic stirrer onto the workbench and plug in.

Turn on the stirring swtich colckwise to set the stirring speed you need.

Turn on the heating switch colckwise to set proper power

Package Includes:

1 x Magnetic Stirrer
1 x Fuse
1 x Stirring Bar
1 x Power Line
1 x User Mannual

Fix Bracket Orifice

Effectively fix the bracket and support the bracket to facilitate subsequent heating procedures.

Power Port

Plug the power cord into the power port to maintain the normal operation.

Power Switch Button

Push the switch, the whole agitator can be operated to heat the product that needs to be heated. Ensure that the heating sequence is carried out.

Black Silicagel Base

The base made of good material silicagel base can fix the entire magnetic stirrer on the console, and avoid the shaking caused by stirring.


	SH-2/2L	SH-3/3L	SH-4/5L
Model	SH-2	SH-3	SH-4
Work Plate Dimension	4.7 x 4.7 inch	6.7 x 6.7 inch	7.5 x 7.5 inch
Weight	5.1 LB	8.2 LB	11.5 LB
Voltage	220V/50HZ	230V/50HZ	240V/60HZ
Heating Power	180W	500W	600W
Stirrer Motor Power	10W	20W	30W
Max Stirring Quantity	2L	3L	5L
Speed Range	100-1600 RPM	100-1600 RPM	100-1600 RPM
Heating Temperature Range	350℃-380℃/662℉-716℉	350℃-380℃/662℉-716℉	350℃-380℃/662℉-716℉
Package Dimension(LxWxH)	10.2 x 7.1 x 6.7 inch	12.2 x 9.1 x 8.3 inch	15.4 x 9.6 x 8.7 inche

APPLYCATION

Notes:

Please avoid using metal containers that do not have a perfectly flat bottom.

When stirring viscous liquids, please reduce volume and stirring speed.

Pls be careful with the hotplate turned on. Don't touch the aluminum surface as it gets very hot and can cause severe burns.

The above measurement data is manual measurement, there will be an error of 0.1-0.5mm, the data on the picture is for reference only, the specific details are based on the actual product.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.