Specifications:

• Communication Interface: USB port; Laser Type: CO2 Gas
• Wavelength: 10.64um; Engraving Area: 400x600mm
• Automatic lifting height: 300mm (Not install the rotary axis), 200mm (Install the rotary axis);
• Laser Power: 80W ; Engraving Speed: 0-500mm/s; Cutting Speed: 0-30mm/s
• Cutting/Engraving accuracy: 0.15mm; Carving Depth: 0-3mm (Depend on the material)
• Cutting thickness: 0-11mm (Acrylic), 0-5mm (hardwood such as Oak, mahogany), 0-7mm (cork such as plywood, plywood, composite board) (Depend on the material)
• Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW
• System: WIN7/WIN8/WIN10 32-bit system is the most stable, also suitable for 64-bit
• Machine size: 1350 * 740 * 110mm ; Net Weight: 139kg

Typical Consumables replacement parameters:

• Laser Tube: 80W Length 1250mm Diameter 80mm
• Focal Lens: Diameter 18mm / focal length 50.8mm
• Reflection Mirror: Molybdenum Mirror 20mm

Engraving and cutting samples

Attention: This machine is equipped with a rotary axis, and installed extra rotary axis connect Port and Switch. It can engraving on curved, rounded or spherical surfaces.

LASER ROTARY DEVICE INSTALLATION & ENGRAVING GUIDE

Step 1, Please first put rotary device on Engraving machine workbench, adjust the proper height, also adjust the laser focus distance from laser head to object.

Step 2, Power off Laser machine, find the connect port on the machine, then connect the rotary device here at this port!

Step 3, Open the software and import the files. Then click on Icon button (engrave) for further engraving settings. Select Rotary. Click on the Fixture then setting, select simple fixture.

Step 4, Move the horizontal liner rail to upside of laser machine. Then Turn on power of laser machine, and Laser head will automatically go back to origin. Then manually move the laser head to the top of object which will be engraved on (Move laser head using plugin CorelLASER setting).

Step 5, Position object, adjust focus distance, then click on Icon button (engrave) will be okay.

Application: seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing, printing, paper product, garments sampling, etc.

Engraving Materials:

---Matched: Acrylic, Plywood, Density board, Solid wood, PVC, Leather, Glass, Double color plate, Plastic, Silica gel, Ox horn, Felt, Resin, etc, All non-metal materials.

---Not apply to metal: Can't engraving metal, Only engrave the coat of paint on the metals.

Machine use questions welcome to ask the online service.

Packaging list is shown in the figure below.

Machine Maintenance:

1. Mechanical parts (rails, etc.): There is no specific time limit for the lubrication of the mechanical parts (reasonable maintenance according to the use of the machine). If engraving and cutting materials what are corrosive or easy to produce dust, it is recommended to lubricate the parts after each use of the machine. If engraving and cutting the wood materials, the parts can be lubricated every 2 weeks (apply lubricant with linen, avoid Direct contact by hands, normal car lubricants can be used).

2. Lens: If engraving and cutting materials what are corrosive or easy to produce dust, Clean the lens after each use of the machine. If engraving and cutting the wood materials, the lens can be clean every 2 weeks. Please clean it with cotton swab and stick alcohol. When wiping the lens, pay attention to check if there are any scratches on the lens or if the reflective film falls off. (Regularly Cleaning)

3. Laser tube: The laser tube cooling water should be enough, at least 15 liters of water, keep the water cold and cycle it often. Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Before the machine starts working, be sure to Check whether the laser tube through the water normally, otherwise the laser tube will be damaged.