Operations Guidelines:
1. When cutting the pattern, pay attention to the clear plastic carrier piece on the smooth side, which needs to be mirrored (flipped). Face your cutter.
2. Before transfer, please preheat your fabric for 3-5 seconds to eliminate wrinkles and moisture. If using a home iron, make sure there is no steam.
3. Transfer temperature: 150 ℃ / 302 ℃, medium force, press for about 10-15 seconds.
*Note that if vinyl is not fully adhered to the fabric, continue to press the transfer
4. Cold peel / hot peel
5.After transfer printing, the first cleaning should be 24 hours later, and the reverse side should be cleaned with clean water. Other detergents do not need to be added.