KINCREA 2 Pcs 3 in 1 Soil Tester Moisture Meter, Light and PH Acidity Tester for Plant Care, Soil Hygrometer Water Monitor for Garden, Farm, Lawn Plants Indoor & Outdoor

3-In-1 function: reliable soil Tester of gardener to test soil moisture, pH value and sunlight level of plant, help you decide when to water, control the pH value, and if the plants gets adequate sunlight. Make gardening easier than ever before.

Accurate reading: Premium double needle Tester, fast and accurate to detect and analyze soil moisture, pH acidity, sunlight level for your plants, ensure plants healthy growth by accurate data monitoring.

Easy to set up: battery free. Moisten the soil with water, insert the tester probes into the soil about 4 inches/ 10cm, get the most accurate reading within 10 minutes.

Lightweight and compact: KINCREA soil moisture Tester, 2 pack in one package, compact and portable for indoor and outdoor plants Care, ideal soil test tool kit for home plants, garden, lawn and farm.

KINCREA : free replacement and full refund for quality-related issues. Pls contact us if any questions. Kinctea customer support is easy to reach and up to toe to address your concern well.

Retail Price: $ 16.99

Wholesale Price: Inquire Now

KINCREA 3-in-1 Soil Moisture Meter Light and PH acidity Tester Plant Tester

PH Range: 3.5-8 PH (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)

Specifications:

Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Package weight: 107g

Instructions:

Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use

Tips and Advice:

1. Use fine sandpaper lightly sand the probes so that keep clean and dry and then use.

2. Don't touch the stone or hard objects since it will be easy to damage the probe.

3. Can't test the water for a long time, in case it may damage probe.

4. Don't use it to test rigid ground or floor.

5. Don't touch fire and stay away from children.

6. Remove probe from soil and wipe clean after each use.

Package Included:

2 x KINCREA Soil Moisture Tester

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

KINCREA 2 Pcs 3 in 1 Soil Tester Moisture Meter, Light and PH Acidity Tester for Plant Care, Soil Hygrometer Water Monitor for Garden, Farm, Lawn Plants Indoor & Outdoor

BEST SELLERS

Product introduction

Shipping Notices

Product Description

KINCREA 3-in-1 Soil Moisture Meter Light and PH acidity Tester Plant Tester

PH Range: 3.5-8 PH (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)

Specifications:

Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Package weight: 107g

Instructions:

Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use

Tips and Advice:

1. Use fine sandpaper lightly sand the probes so that keep clean and dry and then use.

2. Don't touch the stone or hard objects since it will be easy to damage the probe.

3. Can't test the water for a long time, in case it may damage probe.

4. Don't use it to test rigid ground or floor.

5. Don't touch fire and stay away from children.

6. Remove probe from soil and wipe clean after each use.

Package Included:

2 x KINCREA Soil Moisture Tester

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.