(20.5") Wide Swag Finger Brake Heavy Duty DIY Builder Kit (20.5" Wide Finger Brake HD DIY Builder Kit)

Made in the USA!

The 20.5\" is designed to fit the following part numbers from Princess Auto #8604597 & 8604605.

The top clamping bar is machined out of 4140 material.

Includes 4 segmented removable sections. 1\", 3\", 4\" and 9.5\" long pieces.

The Brake comes Un-Assembled. Tools required for assembly, welder, grinder, level, small square.

size:

20.5" Wide Finger Brake HD DIY Builder Kit

Retail Price: $ 350.95

Wholesale Price: Inquire Now

20.5" Wide Heavy Duty Finger Brake Press DIY Builder Kit

This brake is exactly like the 20 ton HD finger brake....just ~2" narrower. A majority of our international customers have hydraulic presses that are 20.5" wide between the inside frame rails, hence this 20.5" wide version.

Please note: The pictures shown above with the Harbor Freight Press are for example only, We do not have an imported 20.5" wide press at this time.

The press Brake kit comes un-assembled, you do the final assembly and welding. Designed to fit any press brake that has in inside width between the frame rails of 20.5" wide or wider. Press brake kit includes an adjustable back stop for accurate and repeatable bends.

The top clamping bar is machined out of 4140 material and includes 4 segmented removable sections. 1", 3", 4" and 9.5" long pieces. These segmented blocks can be removed and rearranged to allow bending of restricted areas on a piece of sheet metal or on an already partially formed pieces.

The heavy duty press brake kit has the same quality construction and number of components as the standard press brake kit, however the differences are as follows. The bottom formed channel on the HD press brake kit is cut out of high strength 3/8" thick steel and the bottom "V" die of has a total width of 4" wide x 1/4" thick to allow for easier bending of thicker material.

Max Bending Radius (deg.) 110
Max. Bending Capacity 5/8" plate
Max Bending Width 17.875"
Total width of the brake is 20.5" wide

Tools required for assembly, welder, grinder, level, small square.

It Is capable of bending mild steel in the following length and thickness.

17.875" = Full bending width of the bottom die on anything 3/16" or thinner.
15" in 1/4"
13" in 5/16"
11" in 3/8"
6" in 1/2"
3" in 5/8"

Please provide us a valid shipping address that USPS delivers too.

Here at SWAG our Finger Brakes are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication.

Product evolution and expansion has led us to Several different sizes and models of Brakes designed to meet a wide variety of needs. From our smallest, with a bending width of 13.50", to our Mammoth 50" Universal Finger Press Brake DIY Builder Kit with a total bending width of 49"! We strive to keep the needs of the everyday working man or Saturday shop hound at the forefront of our minds.

SWAG Off Road

Innovative
Unique
Authentic
Efficient
Integral
Honorable

We believe in our Motto "Doing Ordinary Extraordinary!"

Since our inception, we have a long history of service. We believe in doing business the old fashioned way; we actually answer our Phone!

Visit our website for more information!

_ Available Press Brake Accessories:


Machined Arbor Press Plates (Pair) Cut out of high strength grade 50-A572 steel plate. These arbor press plates are sold as a pair and are designed to replace the junk cast arbor plates that are prone to shattering under heavy load. Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges. We currently offer 4 different sizes of arbor plates 8.50'' X 10.00'' X 1.50'' Are the Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates. The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading.	SWAG Digtal Angle & Level Gauge Take the guesswork out of bending sheet metal on your SWAG press bake kits. Just set the unit on a flat reference surface, press the ZERO button to calibrate the display then attach it to the metal you are forming and precisely bend sheet metal to the desired angle. The Angle Cube offers 0.2 degree accuracy with a resolution of 0.05 degrees at a range of 90 degrees. The large LCD screen makes it easy to read while strong magnets hold the unit to any steel or cast iron surface. Spare battery included, measures 2 3/8 Inch x 2 3/8 Inch x 1 3/8 Inch.	20.5" FLAT TOP Adjustable Bottom V Die This simple concept allows you to easily adjust the gap between the bottom V die, by loosening two 5/16" bolts and siding the 3/8" thick laser cut plates in or out. This will allow for tighter bends on thinner materials and or allow you to bend much shorter pieces of material than what is currently offered with the SWAG standard or heavy duty press brake kits. The bottom steel plate has 4 threaded 5/16" holes and is laser cut out of 5/8" thick steel which sits upon the bottom die of the SWAG 20.5" Finger brake kits. The "Flat Top" is a self contained unit and can be removed or slid into position with in a few seconds.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

(20.5") Wide Swag Finger Brake Heavy Duty DIY Builder Kit (20.5" Wide Finger Brake HD DIY Builder Kit)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

20.5" Wide Heavy Duty Finger Brake Press DIY Builder Kit

Please note: The pictures shown above with the Harbor Freight Press are for example only, We do not have an imported 20.5" wide press at this time.

Max Bending Radius (deg.) 110
Max. Bending Capacity 5/8" plate
Max Bending Width 17.875"
Total width of the brake is 20.5" wide

Tools required for assembly, welder, grinder, level, small square.

It Is capable of bending mild steel in the following length and thickness.

17.875" = Full bending width of the bottom die on anything 3/16" or thinner.
15" in 1/4"
13" in 5/16"
11" in 3/8"
6" in 1/2"
3" in 5/8"

Please provide us a valid shipping address that USPS delivers too.

Here at SWAG our Finger Brakes are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication.

SWAG Off Road

Innovative
Unique
Authentic
Efficient
Integral
Honorable

We believe in our Motto "Doing Ordinary Extraordinary!"

Since our inception, we have a long history of service. We believe in doing business the old fashioned way; we actually answer our Phone!

Visit our website for more information!

_ Available Press Brake Accessories:


Machined Arbor Press Plates (Pair) Cut out of high strength grade 50-A572 steel plate. These arbor press plates are sold as a pair and are designed to replace the junk cast arbor plates that are prone to shattering under heavy load. Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges. We currently offer 4 different sizes of arbor plates 8.50'' X 10.00'' X 1.50'' Are the Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates. The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading.	SWAG Digtal Angle & Level Gauge Take the guesswork out of bending sheet metal on your SWAG press bake kits. Just set the unit on a flat reference surface, press the ZERO button to calibrate the display then attach it to the metal you are forming and precisely bend sheet metal to the desired angle. The Angle Cube offers 0.2 degree accuracy with a resolution of 0.05 degrees at a range of 90 degrees. The large LCD screen makes it easy to read while strong magnets hold the unit to any steel or cast iron surface. Spare battery included, measures 2 3/8 Inch x 2 3/8 Inch x 1 3/8 Inch.	20.5" FLAT TOP Adjustable Bottom V Die This simple concept allows you to easily adjust the gap between the bottom V die, by loosening two 5/16" bolts and siding the 3/8" thick laser cut plates in or out. This will allow for tighter bends on thinner materials and or allow you to bend much shorter pieces of material than what is currently offered with the SWAG standard or heavy duty press brake kits. The bottom steel plate has 4 threaded 5/16" holes and is laser cut out of 5/8" thick steel which sits upon the bottom die of the SWAG 20.5" Finger brake kits. The "Flat Top" is a self contained unit and can be removed or slid into position with in a few seconds.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.