mosaic contact paper---Decorate your life
1. Cleaning: Thoroughly clean the surface and keep it dry to ensure there are no dust or debris.
2.Measure & Cut: Cut the film to the desired size through the grid lines. It is suggested to leave 1 inch margins at each side for later adjustment.
3.Apply: Starting from one side, peel off the backing gently whilst applying the film to the surface inch by inch (don't remove the backing at once).
4.Flatten: While applying the film, use a cloth, a squeegee or a card to remove the air bubbles or bump areas.
5.Tips: When sticking edges and corners, use a heat engine or hair dryer to soften under heat to make edges and corners more perfect.
1.The tile sticker is roll.so it can apply the bigger area.
2.The protuct is waterproof.so you can use it decoration kitchen and bathroom.
3.The product have more color.so you have more choose.
4.The mosaic contact paper back is vinyl,you don't need extra glue.
5.The surface of the product is PVC film,it let clean become easy.Just wipe it with a wet towel.
Wrinkles appear when pasting, you can tear open and continue to paste.
If you find a small bubble after the paste is finished, you can use a needle to poke it and use a soft cloth to squeeze the air out.
Because the product is rolled,Sudden stretching may cause wrinkles,But these folds will disappear when pasted.
Our products are peeled and sticky,So please don't tear off its backing paper at once.This will make the product stick together.
Color tones can vary due to lighting in the room