FAQ-Technical support for μBTR
1. How to pair cellphones with μBTR?
A: 1. Please unlock your cellphone and turn on Bluetooth firslty;
2. μBTR is in pairing mode which means blue and red lights flashing alternately.
To enter pairing mode: a. Hold the multifunctional button for about 5 seconds when the device is off, and the blue and read lights will flash alternately.
2. Is aptX supported on μBTR?
A: Yes. μBTR adopts the Bluetooth 4.1 and supports SBC, AAC and aptX codec.
.
3. Does μBTR have the NFC? How to pair it to cellphone with NFC?
A: After μBTR is turned on, unlock your android device with NFC, get μBTR and your android device touched by the NFC detecting area to start the pairing.
4. How to clear the pairing record on μBTR?
A: Please hold the Volume "+" and Volume "-" buttons for 5 seconds, then it will clear the pairing record on uBTR.
5. Does μBTR has stand-by function?
A: When it's connected and no playback, the μBTR will enter the stand-by mode. (Lower power consumption).
6. How to use the μBTR with two Bluetooth devices simultaneously?
A: 1) Enable the Bluetooth function on both the deivce A and device B that need to be used simultaneously with the μBTR.
2) While the μBTR is powered off, hold the power button of the μBTR for around 5 seconds to enter pairing mode (with the red and blue light flashing alternately). Search for μBTR on the device A and pair it with the μBTR.
3) On device A, select μBTR in the device list and disconnect. After that power off the μBTR by holding the Power button for around 3 seconds.
4) Follow the step 2 to pair and connect the μBTR with the device B.
5) Select μBTR on device A to reconnect.
After that, if you play music on device A, you can hear the music from it on the μBTR. And if you pause the music on the device A then play on device B, you can hear the music from the device B.