PrimoChill Opaque - Pre-Mix (32oz) - Yellow

  • Repeatable chemistry for true colors every time
  • Special inhibiting ingredients that prevent sludge build up of algae and galvanic corrosion
  • Preservative and APE free
  • Safe on all plastics, rubbers, miscellaneous gasket materials, and acrylic
Retail Price: $32.95
Wholesale Price: Inquire Now

Product Description

PC Opaque Banner
Step 1 - Vue

Step 1 - Prepping

If your system is brand new we recommend using both Rad Clean and Sys Prep. If you have existing system, utilize our Rad clean and then move to step 2.

Step 1 - Vue

Step Two - Vue

Step 3 - Vue

Step 4 - PC Opaque

Chart
Vue PC Opaque True Opaque True Transparent Pc Ice
Vue PC Opaque True Opaque True Transparent PC Ice
Difficulty Expert Intermediate Intermediate Beginner Beginner
Fluid Type Show Fluid (performance properties) Performance Fluid Performance Fluid Performance Fluid Performance Fluid
Available Colors 25 25 25 13 13
Biocidal Growth Inhibitors
Recommended for Daily Use
Conductivity Low Low Low Low Low
Non-Toxic
Water Based

PC Opaque Important Information

Maintenance As with all custom loop water-cooling, continual maintenance and frequent inspection is required. PC Opaque will need to be replaced every 6 months or sooner, depending on the complexity and conditions of your loop. This will be required to maintain the aesthetic appeal of your loop. Opaque coolants are to be monitored daily to ensure that there is no color change or any collection or separation of PC Opaque.

Staining The use of any colored fluids/dyes WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components.

Color Loss During the initial application of PC Opaque, the product may change/lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens to your system, immediately drain and flush it out with DI or Distilled water. Once the system has been drained and cleaned, refill your system with PC Opaque fluid once again.

High Pressure Systems The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of PC Opaque coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop.

Collection or separation of particles As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup/blockage can cause the fluid in your system to flow slower and could possibly stop flow all together. System pressure also plays a role in how well PC Opaque performs. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running your system with PC Opaque coolant after it has separated can cause unknown issues and could require the user to remove, open, and clean each individual component in the system.

Note: USE OF THIS PRODUCT WITH ALUMINUM COMPONENTS (SUCH AS ALUMINUM CONSTRUCTED RADIATORS) IS STRONGLY DISCOURAGED. PRIMOCHILL WILL NOT SUPPORT OR REPLACE FLUIDS USED WITH AN ALUMINUM COMPONENTS. USE OF THIS FLUID IS AT YOUR OWN RISK, PRIMOCHILL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THIS FLUID.

Best Selling
This website follows the safe harbor principle. If any infringement, please inform us in time
and we will delete it in time. About safe harbor,please click here to learn more.
!




YOYBUY ON SOCIAL MEDIA
CONTACT US
+86 10 84847953 - 6117
service@yoybuy.com
BEIJING TIME
SERVICE TIME
09:30 - 18:30
Mon-Sun







Copyright © 2008-2018 YOYBUY Ltd. All Rights Reserved 京ICP备 15030389号 Contact Us About Us Terms of Service Privacy Policy Insurance Policy
X

Contact us now