Concrete Floor Crack Repair Kit - Ultra Low Viscosity Polymer - FLEXKIT-1200-40

Retail Price: $ 263.0

Contractor-Grade Floor Kit

Flexomeric FLEX-1200 is a dual component, ultra low viscosity (very thin), high quality interior concrete repair polymer. Flexomeric FLEX-1200 is designed for rapidly repairing deeply spalled or damaged concrete surfaces, broken control joint walls and various cracks in concrete.

It penetrates floor cracks better than epoxy, and does not become brittle over time as epoxies do. FLEX-1200 is intended for use in damaged concrete such as overhead concrete cracks, hairline floor cracks, parking garage decks and spalls and crack in fork lift traffic areas. It is unique in that it can be used below very cold temperatures as found in cold storage warehouses or walk-in freezers. It is designed for repairing floor cracks that are hairline to wide.

Usage: Concrete floor cracks in garages, driveways, patios, broken control joints, deeply spalled or damaged control joints, and various other concrete floor crack repairs.

PROFESSIONAL GRADE KIT

Ready for the job, our kits include the same materials and method that professional contractors use. We don't compromise on quality, so your job gets done right the first time.

What's in the box:

4 Flexomeric FLEXTUBE-1200 Crack Injection Resin Cartridge (600ml Dual-Pack)
6 Element Static Mixer Nozzles
4 Retaining Nut
4 Pair of Gloves
1 Plastic Trowel
1 Wire Brush
1 Safety Goggles
1 Instruction Booklet


Dual-Cartridge Gun The 600ml dual-component FLEX-1200 Resin is injected into the concrete crack using a quality, dual-component injection gun. (Included)	Wire Brush A wire brush is required for the cleaning step of the instructions. It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack. (Included)	Hand Grinder It is best practice to grind the length of the crack to facilitate the injection process. A dustless hand grinder is recommended to elimate compacted concrete dust. (Not included in this kit)	Safety Goggles Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes. (Included)

Which Flexomeric kit do I need?

Choosing the correct Flexomeric Floor Crack Repair kit is easy.

Measure the smallest width of the crack. The injection material needs to be able to penetrate this portion of the crack to ensure that entire crack is sealed.

Use the following kits according to their corresponding measurements:

Hairline to wide: FLEXKIT-1200
3/32" to 1/2": FLEXKIT-1300
Hairline to 3/32": FLEXKIT-1350

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Concrete Floor Crack Repair Kit - Ultra Low Viscosity Polymer - FLEXKIT-1200-40

BEST SELLERS

Product introduction

Shipping Notices

Product Description

PROFESSIONAL GRADE KIT

Ready for the job, our kits include the same materials and method that professional contractors use. We don't compromise on quality, so your job gets done right the first time.

What's in the box:

4 Flexomeric FLEXTUBE-1200 Crack Injection Resin Cartridge (600ml Dual-Pack)
6 Element Static Mixer Nozzles
4 Retaining Nut
4 Pair of Gloves
1 Plastic Trowel
1 Wire Brush
1 Safety Goggles
1 Instruction Booklet


Dual-Cartridge Gun The 600ml dual-component FLEX-1200 Resin is injected into the concrete crack using a quality, dual-component injection gun. (Included)	Wire Brush A wire brush is required for the cleaning step of the instructions. It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack. (Included)	Hand Grinder It is best practice to grind the length of the crack to facilitate the injection process. A dustless hand grinder is recommended to elimate compacted concrete dust. (Not included in this kit)	Safety Goggles Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes. (Included)

Which Flexomeric kit do I need?

Hairline to wide: FLEXKIT-1200
3/32" to 1/2": FLEXKIT-1300
Hairline to 3/32": FLEXKIT-1350

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.