Waterproof
Fabric has been treated with waterproof coating, good for rain and sun blocking at the same time, need to tilt the shade sail in low-high position to prevent polling water during installation.
|
98% UV Blocking
Blocks up to 98% of harmful UV, significantly reduce the temperature and UV sunlight in shaded area during summer time, ideal for patio, swimming pool, balcony, carport etc. Breathable fabric allows water and air to go through freely, no pooling water in rainy days, resistant to both UV and water, no maintenance needed.
|
How to Measure
- Shade sail's measurement should be taken from corner to corner.
- Approximate how much area you want to shade. Locate 4 mounting points, they can be roof, trees, poles, wall, etc.
- Take measurement of the 4 mounting points, leave 0.5 ft to 1 ft space for the hardware kits between the shade sail and the mounting points.
- Install the hardware kits on 4 mounting points, make sure they are in high-low position, so the water can run off, prevent pooling water.
|
How to Install
- If the space between shade sail and hardware kit is more than 1 ft, use cable wires as extension, to connect the shade sail to the hardware kits.
- Install the shade sail, connect the D-ring to the hardware kits or cable wires.
- Adjust the turnbuckles to create tension.
- Make sure they are in high-low position, so the water can run off, prevent pooling water.
|