- 【GREAT COMPATIBILITY】: Our premium tires are compatible with the Xiaomi Mijia M365 which is the primary scooter used for BIRD LIME JUMP SPIN & LYFT Scooters!
- 【WEAR RESISTANT PERFECT DESIGN】: explosion-proof, no need to worry about puncture damage, lightweight and durable.
- 【HIGH SUPERIOR QUALITY GUARANTEE】:Made of high-quality rubber material with rubber grooved surface provides excellent grip! The high quality durable plastic is built to withstand thousands of miles of use!
- 【BE CAREFUL】: Don't be fooled into purchasing low quality tires with poor traction. These parts will not maintain good traction and could put your life at risk!
- 【TEACH YOU HOW TO INSTALL】:If you don't know how to install your tires, please contact us and we will give you an easy installation tutorial, a complete service system.
Our Company
Our Products
|
|
|
|
|---|---|---|
|
|
|
|
The installation process consists of two parts:
Remove the inflatable tire.
1. Find the red label and pull it off then loosen the two screws below it.
2. Remove the first plastic cover then loosen the other four small screws below it.
3. Turn the scooter over to the other side and repeat the process. You should be left with one nut embedded deeply into the wheel under a plastic cover that is attached to the wheel support system.
4. Lift the cover slowly to avoid cracking it then loosen the nut below it using a wrench.
5. The wheel is now adequate enough to slide out easily. The motor cable is still attached (to the front wheel) so do not pull it off.
Fitting in the solid tire.
1. Add a lubricant on the rim of the wheel.
2. You need to soften the solid wheel before fitting it: Boil some water to about 100°C in a pot large enough to fit the tire. Put it in the pot (make sure that it is wholly immersed) then leave it for ten minutes. Or you can heat the tire in a microwave for three minutes, checking it after every minute.
3. Once the wheel is soft enough, remove it and fit the rim into it. Let it cool for five minutes.
4. Fasten the nut and the other screws (while replacing the plastic cover) on both sides. This is basically the reverse of the initial process of removing the wheel. Also, make sure that you return the red labels.
BEST SELLERS
Product Description
Our Company
Our Products
|
|
|
|
|---|---|---|
|
|
|
|
The installation process consists of two parts:
Remove the inflatable tire.
1. Find the red label and pull it off then loosen the two screws below it.
2. Remove the first plastic cover then loosen the other four small screws below it.
3. Turn the scooter over to the other side and repeat the process. You should be left with one nut embedded deeply into the wheel under a plastic cover that is attached to the wheel support system.
4. Lift the cover slowly to avoid cracking it then loosen the nut below it using a wrench.
5. The wheel is now adequate enough to slide out easily. The motor cable is still attached (to the front wheel) so do not pull it off.
Fitting in the solid tire.
1. Add a lubricant on the rim of the wheel.
2. You need to soften the solid wheel before fitting it: Boil some water to about 100°C in a pot large enough to fit the tire. Put it in the pot (make sure that it is wholly immersed) then leave it for ten minutes. Or you can heat the tire in a microwave for three minutes, checking it after every minute.
3. Once the wheel is soft enough, remove it and fit the rim into it. Let it cool for five minutes.
4. Fasten the nut and the other screws (while replacing the plastic cover) on both sides. This is basically the reverse of the initial process of removing the wheel. Also, make sure that you return the red labels.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
