Funshowcase Jewelry Cut Diamonds and Flat Round Resin Epoxy Silicone Mold Mini

Clear diamond and flat circle shape resin mold for keychain, charm, ring, bracelet, hairclip mount, earrings, studs making, DIY phone case etc. Use with a wide range of edible and non edible materials, such as resin epoxy, uv resin, air clay, polymer clay, resin clay, paper clay, concrete, plaster, candle, soap, wax, isomalt, fondant. For various of baking or crafting projects, such as jewelry making, wax accents, scrapbooking etc.

High resoluction transparent so you can check the buttom when process project

For resin casting, use a bright LED light helps to see bubbles more easily. Sometimes trapped bubbles can come up to the surface later. Be sure to check your casting more than just 1 time after pouring for any additional bubbles. And do it in section to avoid bubbles.

Use cotton swab for easy cleaning the extra ( or scissors will be required for triming the finished product ) . Release spray can help de-mold for resin projects. For clay projects after baking, you may try to remove the finished product under the running water with soap for easy release. For other food material, such as isomalt, the filled mold may try to place in freezer for a few minutes to avoid distortion when de-molding.

Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food.

color:

Diamonds and Flat Circle

Retail Price: $ 3.99

Wholesale Price: Inquire Now

Note: all measurements are approximate due to handmade nature and may change when sanded

Finish: gloss ( may require polish or glaze if need a shiniest or most glossy look )

Transparent silicone, so you may check the bottom during project

Food grade. Food and not food material should use separately

Wash and boil before use, especially for food

Flexible, easy to clean, used in oven, dishwasher, refrigerator.

Suffer temperature -40~220 centigrade (-40~428 fahrenheit)

More Tips to use with Epoxy Resin:

1) poured in silicone molds in layers, allowing air bubbles completely escape;

2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.


	LOT! UV resin casting kits	LOT! Pendent Molds Jewelry Casting Set 39 Kits	LOT! Jewelry Making Molds & Supplies Pack of 159	LOT! Crystal Resin Casting Molds Set 54 Kits	18 Pastel Solid Colors UV Resin	LOT! Geometry Molds Set 26 Kits
You may also Like!	UV Resin Casting Supplies Pack of 58 Kits	Make Pendant Earrings Charms & Much More!	LOT! With Large Bracelet Mold Rarely Find in Market	Gem Stone Assortment for Varied Jewelry Making Projects	UV Resin Hard Type 10ml per Bottle	Pack of 9 Trays Pyramid Cone Cube Sphere Crystal Stones Diamond Gem


	LOT! Cabochon Jewelry Casting Pack 411-Kits	Earring Pendant Charm Silicone Molds 5-count	Pendant Jewelry Making Molds Set 45-kit	Book Covers Bookmarks Card Cover Silicone Resin Molds	Geometric Resin Silicone Molds 11-count	Sphere Resin Silicone Molds 6-count
You may also like	Make Pendant Earrings Bracelet & Much More!	Diamond Plaque Triangle Tags Assortment	Make Varied of Necklace Pendant, Earrings, Charms	Resin Casting Set 87-kit with Book Rings Tassles Glitters Stickers Film Inlay Keychain	Square and Rectangle Assortment	Round Orb Assortment

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Funshowcase Jewelry Cut Diamonds and Flat Round Resin Epoxy Silicone Mold Mini

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Note: all measurements are approximate due to handmade nature and may change when sanded

Finish: gloss ( may require polish or glaze if need a shiniest or most glossy look )

Transparent silicone, so you may check the bottom during project

Food grade. Food and not food material should use separately

Wash and boil before use, especially for food

Flexible, easy to clean, used in oven, dishwasher, refrigerator.

Suffer temperature -40~220 centigrade (-40~428 fahrenheit)

More Tips to use with Epoxy Resin:

1) poured in silicone molds in layers, allowing air bubbles completely escape;

3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.


	LOT! UV resin casting kits	LOT! Pendent Molds Jewelry Casting Set 39 Kits	LOT! Jewelry Making Molds & Supplies Pack of 159	LOT! Crystal Resin Casting Molds Set 54 Kits	18 Pastel Solid Colors UV Resin	LOT! Geometry Molds Set 26 Kits
You may also Like!	UV Resin Casting Supplies Pack of 58 Kits	Make Pendant Earrings Charms & Much More!	LOT! With Large Bracelet Mold Rarely Find in Market	Gem Stone Assortment for Varied Jewelry Making Projects	UV Resin Hard Type 10ml per Bottle	Pack of 9 Trays Pyramid Cone Cube Sphere Crystal Stones Diamond Gem


	LOT! Cabochon Jewelry Casting Pack 411-Kits	Earring Pendant Charm Silicone Molds 5-count	Pendant Jewelry Making Molds Set 45-kit	Book Covers Bookmarks Card Cover Silicone Resin Molds	Geometric Resin Silicone Molds 11-count	Sphere Resin Silicone Molds 6-count
You may also like	Make Pendant Earrings Bracelet & Much More!	Diamond Plaque Triangle Tags Assortment	Make Varied of Necklace Pendant, Earrings, Charms	Resin Casting Set 87-kit with Book Rings Tassles Glitters Stickers Film Inlay Keychain	Square and Rectangle Assortment	Round Orb Assortment

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.