FAQ for the egg incubator:
Q:How to set the temperature?
A:The user manual contains information on how to set the temperature. Press setting button,and then press +/- to adjust.
Q: How do I know if its turning my eggs?
A: You can test by marking the egg with a pencil and periodically checking to see if the marked side has moved. It's a slow process.
Q: Is it possible to turn off the automatic turner?
A: Yes, You can turn off it by disconnect the egg tray and automatic egg turner motor connector. But remember eggs need be turned until last 3 days very close to hatching.
Q: Does it show the humidity reading? And how to keep the humidity?
A: It display humidity level so no need to buy additional hygrometer to monitor incubator humidity level. There is no humidity setting on this incubator and by external water top-up adjust the humidity and add or remove water as needed.
Q: The incubator is not holding a consistent temp. How to do that?
A: The factory temperature setting is about 38 degree( Celsius ) (the 38 degree is suggestted for the chicken eggs, if any other kinds of eggs, you need to adjust by the suggested temp). We suggest you could use more than one thermometer/humidity sensors to work with if needed.
Warm Tips:
1. Disconnect power supply every time before opening the incubator cover;
2. Keep the incubator warm by clothes or towels when power is off;
3. Add water every one or two days;
4. Tips for Selecting Eggs:
a.Never use eggs that have cracks, which cannot keep the moisture they need to hatch.
b.Do not hatch eggs that have different hatching times in one hatching.
c. Eggs to hatch must be fertilized. Do not wash your eggs!
d.Do not use eggs that have stored for longer than 10 days.