LAUNCH X431 PRO MINI Support All System Diagnosis / Bi-Directional Control +Active Test + Adaptation+ Matching+ Reset + Initialization+Coding

Bi-Directional Control +Active Test + Adaptation+ Matching+ Reset + Initialization+Coding

[ ECU CODING ]: X431 PRO MINI features advanced ECU coding that many aftermarket diagnostic tools don’t support. You can use it to active new ECU to work on some special vehicle without using expensive original equipment. It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts.

[ BI-DIRECTIONAL SCANNER CONTROLS ]: A single directional scanner will only report to you fault codes and other anomaly with the car. A Bi-directional scanner also reports fault codes and anomaly from the cars ECU, and it can send commands to the car to activate different systems for testing. Hence the addition of 'bi' to the word bi-directional, meaning two-way communication between the scanner and the cars ECU.

[ REMOTE DIAGNOSIS ]: REMOTE DIAGNOSIS Not only users can launch the remote diagnosis with other diagnostic scanners of LAUNCH family, which are equipped with this module as well, also they can ask for the remote control through phones, tablets, and computers etc. It has realized the reality that a mechanic can diagnose an abnormal vehicle which is even thousands of miles away.

[ ACTIVE TEST ]: Figure out whether a specific subsystem or component in your car functions well or not by using LAUNCH X431 PRO MINI to make the tester outputs function instead of checking in ignition status.

[ Matching ]: Also known as adaptive function, it can adjust the data of the actuator so that the data of the replaced actuator can be accepted and recorded by ECU.For example, when you clean the carbon deposit on the throttle, there is engine idle jitter. That's because your throttle angle change data is not recognized by ECU, resulting in inconsistent data, and the engine can not work accurately. You can make a match with Launch x431 pro mini to synchronize ECU data with throttle data after cleaning.

LAUNCH X431 PRO MINI-Powerful & Professional Full System Diagnostic Tool(Same Function with X431 V+)

To diagnose car comprehensively, LAUNCH X431 PRO MINI scanner can read DTCs and data streams for ALL systems. For instance: Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, ....etc.( OVER 100,000 CAR REPAIR SHOPS & MECHANICS 's First Choice)

LAUNCH X431 PRO MINI Diagnostic Tool Supports More than 20 special Reset functions

20 Reset functions Including BUT NOT LIMITED

20 Reset function Including,BUT NOT LIMITED: It supports most vital special functions like,Oil Lamp Reset/TPMS Reset/Immo Matching/EPB Reset/Steering Angle Calibration/Battery Register&Battery Maintenance/ABS Bleeding/Electronic Throttle Position Reset.

• LAUNCH X431 PRO MINI Supports More than 20 special Reset functions.
• NEW RESET FUNCTION ADDED: AFS/EGR/GEARBOX/SUSPENSION/SUNROOF RESET.
• Some new functions is developing.You can give your car all-round detection with this scan tool.

1.Oil Lamp Reset : Reset the oil life systems every time the oil and oil filter are changed;

2.Injector : Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

3.Electronic Parking Brake Reset : Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

4.Steering Angle Calibration: Perform steering angle sensor calibration and clear records;

5.Battery Register / Battery Maintenance： Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;

6.ABS Bleeding : When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;

7.Electronic Throttle Position Reset / Learn : Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

8.TPMS Reset : Tire pressure resetting is required to be performed after maintenance is performed;

9.Diesel Particulate Filter (DPF) Regeneration： Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

10.Gear Learning: Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;

11.Key Coding: Help ECU to recognize the new keys when you need to add new keys.

GENERATE YOUR REPORT & RECORD & PLAYBACK DATA STREAM

[ MY REPORT ]: My Report This option is used to view the diagnostic report generated in process of vehicle LAUNCH X-431 PRO MINI User Manual 30 diagnosis. Additionally, delete, share operations are also supported. Tap “My Report”, there are total 3 options available. If user records the running parameters while reading data stream,it will be savedas.x431 file and appear under Diagnostic Record tab.

-Data Stream record and playback in”My Report”:My Report can view Comprehensive diagnostic reports, Remote diagnostic reports, Data stream playback.Record and playback the data stream help you analyze the trouble when driving and solve it.

-View History:Once a vehicle diagnosis is performed, X431 PRO MINI will record the every detail of the diagnostic process. The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.

[ 2 Years Free Update ]: After registering this scan tool, you will be eligible to download all the latest diagnostic software updates being free for 2 years. LAUNCH X431 PRO MINI support one-click update via WI-FI.

GLOBAL VERSION-EXTENSIVE VEHICLE COVERAGE + MULTILINGUAL

• Launch X431 Pro Mini Diagnostic Tool supports all electric controlling system of EFI vehicles that covers Martha Lahti, Ferrari, Rolls-Royce, Bentley, Mercedes Benz, BMW,for Audi etc up to 150 car brands, up to 10000 car models, as well as EV, hybrid and gas vehicles，including： BMW, Benz, GM, USA Ford, for Chrysler,for VW, Porsch, Toyota, for Volvo, for Audi, Acura, Changan, Daweoo, Gaz, Hafei, Huachen, Jiao, Lexus, Xiali, Xinkai, Fiat, Holden, Maruti, Opel, Peugeot, Saab, Ssangyong, Tata, Changhe, Flyer, GMSA, Infiniti, Mahindra, Perodua, Proton, Qirui, Tlisuzu, Zhongshun, EOBD2, Euroford, Jagar, Renault, Smart, Sprinter, VAZ, Changcheng, Dacia, Ford, HaoQing, Jinlong, Liuwei, Rover, ZhongTai, ZhongXing, Bxfiat, HM, Isuzu, Jacty, JPIsuzu, Mazda, Seat, Skoda, Suzuki, Daihatsu, Mitsubishi, Citroen, Hyundai, Kia, Lancia, Landrover, for Nissan, Romeo, for Subaru
• MULTI-LANGUAGE :English, Arabic,Polish, German, Russian, French, Finnish, Dutch, Czech, Portuguese, Spanish, Hungarian, Italian, Japanese, Swedish, Turkish, Greek, Denish, Korea.
• WHAT WILL YOU GET?
• LAUNCH X431 PRO MINI comes with Connectors: toyota-22, GM vaz-12, honda-3, for chrysler-6, toyota -17, benz-38, bmw-20.
• LAUNCH X431 PRO MINI comes with Cables: power cable clips, obd1 adapter, obd-16 Extend, fiat-3,for nissan-14+16, MITSUBISHI HYUNDAI-12+16
• Gift: EL-50448 TPMS Reset Relearn Activation Tool. It can quickly reset tire sensors after you do tire rotation or change a new tire. TPMS EL-50448 will be delivered in extra package.