Installation notes
These heaters are not supplied with a cord and must be hard-wired.
CNS-E heaters vary in width depending on wattage but all are 17¾" (45.0 cm) tall.
CNS-E models stick out 4” from the wall.
Because these are convection heaters that vent warm air out the top, the recommended installation location requires 10" clearance above the unit. Ideal installation height is minimum 4” off the floor.
All CNS-E heaters must be mounted vertically.
Observe all installation manual precautions regarding minimum allowed clearances between the installed appliance and any hard surfaces.
Do not allow combustible materials on or near the heater.