Lantee 20 Pcs 16 x 25mm Wall Standoff Mounts Screws, Stainless Steel Mounting Hardware Bolts for Signs, Glass, Acrylic, Graphics, Panels
- Dimensions: Totally Size: 16mm x 25 mm, about 0.63\" x 0.98\". Thread Stud length: 11/16\", suggest to hold the glass or panel with a thickness less than 1/2\". Thread Stud Diameter: 3/8\" Barrel length: 19.5mm, about 3/4\" from the wall to the back of the glass or panel. Hole Size: 5mm, about 3/16\", will fit for 5mm screw.
- Easy to Install: 1. Drill holes on your sign, and make sure the hole size range is 9.5mm to 12mm. 2. Mark the holes of your sign on the wall, make sure the sign will install on the right place. 3. Drive the anchor screw to the wall, make sure the screw's diameter is lower than 5mm. 4. Install the barrel on the wall. 5. Put the sign or glass on and thread the stud to the barrel
- Protect Your Glass: Every standoff have clear rubber spacer between Stud and Barrel, which will protect your glass.
- Widely Used: These standoffs mount signs, graphics, panels and so much more from a wall, table or counter top.
- What You Get: 20 Pcs 16x25mm Lantee Standoff Mounts