BAOSHISHAN 0-100μm Grindometer Stainless Steel Fineness Gauge ISO Standard Single Groove ( 100μm, 8Hegman )

[0-100μm, INDEX VALUE 5μm]--We have four kinds of single groove grindometer: 0-25μm, 0-50μm ( index value is 2.5μm) 0-100μm, 0-150μm ( index value is 5μm). Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns (μm), the accuracy of fineness plate grooves ± 1μm.

[USING AND READING]--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.

[READING UNIT: μm]--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um

[HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.

[NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.

Retail Price: $ 99.0

Wholesale Price: Inquire Now

BAOSHISHAN offers a variety of ink paint detection instruments, can be used to measure viscosity, fineness, abrasion resistance, density and adhesion, gloss, whiteness, thickness, film applicator, colorimeter of paint and ink or other non-Newtonian liquids.

We follow very strict production standards, ensuring the production of all fineness board can maintain high quality and high accuracy to achieve and meet a variety of industries involved in the grinding process, especially in the wet powder paints, varnishes, printing inks and cosmetics industries requirements.

From the research laboratory coatings and inks, to test the production process, in order to obtain reliable and reproducible recipe a critical measurement technique is material particles (including paint or other similar material) for fast and accurate size measurements.
Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns (um), Hagemeyer (Hegman), mil (MILS), the accuracy of fineness plate grooves ± 1μm.

Operation Method

Clean the scraper and plough blade before using.
The paint that is in accordance with consistency index of product standard should be drip into the deepest place of the slanting channel with glass bar.
The quantity dripped should be proper, put scraper、thumb、forefinger and middlefinger of both hand on the top of the gauge to make the edge of scraper contact the surface vertical.
Draw it from the deep place of channel to shallow place. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.

More Than This

Fineness Gauge is used to measure the size and dispersion of pigments and impurities in coatings, paint pulps, inks and other liquids and pastes, so as to control the quality of dispersed products in production, storage and application, widely used in paint, plastics, pigments, printing ink, paper, ceramics, medicine, food and other fields.


	0-25µm Grindometer	0-50µm Grindometer	0-100µm Grindometer	0-150µm Grindometer	0-100µm Double Groove Grindometer	0-100µm 8H Grindometer
Fineness Range	0-25µm	0-50µm	0-100µm	0-150µm	0-100µm	0-100µm
Reading Unit	µm	µm	µm	µm	H & µm & Mil	H & µm

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

BAOSHISHAN 0-100μm Grindometer Stainless Steel Fineness Gauge ISO Standard Single Groove ( 100μm, 8Hegman )

BEST SELLERS

Product introduction

Shipping Notices

Product Description

From the research laboratory coatings and inks, to test the production process, in order to obtain reliable and reproducible recipe a critical measurement technique is material particles (including paint or other similar material) for fast and accurate size measurements.
Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns (um), Hagemeyer (Hegman), mil (MILS), the accuracy of fineness plate grooves ± 1μm.

Operation Method

Clean the scraper and plough blade before using.
The paint that is in accordance with consistency index of product standard should be drip into the deepest place of the slanting channel with glass bar.
The quantity dripped should be proper, put scraper、thumb、forefinger and middlefinger of both hand on the top of the gauge to make the edge of scraper contact the surface vertical.
Draw it from the deep place of channel to shallow place. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.

More Than This


	0-25µm Grindometer	0-50µm Grindometer	0-100µm Grindometer	0-150µm Grindometer	0-100µm Double Groove Grindometer	0-100µm 8H Grindometer
Fineness Range	0-25µm	0-50µm	0-100µm	0-150µm	0-100µm	0-100µm
Reading Unit	µm	µm	µm	µm	H & µm & Mil	H & µm

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.