BOILER TREAT ULTRA | Delimer and Descaler | Muriatic and Hydrochloric acid replacement - 1 Gallon (Removes Scale & Lime in Steam Boilers, Hot Water Systems, Closed Loop Systems & Wood Burning Boilers)
BOILER TREAT ULTRA | Delimer and Descaler | Muriatic and Hydrochloric acid replacement - 1 Gallon (Removes Scale & Lime in Steam Boilers, Hot Water Systems, Closed Loop Systems & Wood Burning Boilers)
Retail Price: $ 34.99
Wholesale Price: Inquire Now

Boiler Treat Ultra+ tackles limescale, hard water buildup, corrosion, and impurities that slow down and reduce the efficiency of your water treatment system. This 100% acid-free formula will quickly and easily remove scale and rust from the hard-to-reach places inside your boiler without posing a danger to your personnel, equipment, or the environment like other acid-cleaners.

Boiler Treat Ultra+ is non-corrosive, non-fuming, odorless, non-irritating to the skin, and biodegrades 100% in less than 10 days, making it the safer choice for boiler cleaning. This formula comes in a liquid concentrate that dissolves 10% more scale than muriatic/hydrochloric acid, has a pH of zero, and carries a triple-zero HMIS score. Use it in your boiler, cooling tower, heat exchanger, or hot water heater to restore system efficiency the safer and easier way.

Directions

For Boilers:

  • Close down boiler for closed-loop descaling. Drain and flush the boiler.
  • Add in treatment (the equivalent of 15-20% of the boiler’s total volume). Fill the rest with water.
  • Circulate the treatment and water for three hours — or six hours for later units.
  • Drain, flush, and refill.

For the soak method, empty the boiler, then fill the boiler with one part product and one part water. Allow the mixture to soak for two to three hours. For either cleaning method, monitor the solution every half-hour using pH treat strips.

For Cooling Stations:

  • Blow down the system. Drain pump.
  • Fill the system with the product (see dilution rates below).
  • Allow the solution to circulate for three to four hours.
  • Drain, flush, and refill.

Dilution rates:

For regular descaling: 5 gallons of product per 10-ton volume.

For light descaling: 3 gallons of product per 10-ton volume.

For heat exchangers:

Prepare your closed-loop heat exchanger as usual. For a normal descale, use a 25% solution; for a lighter descale, use a 10% solution. Circle the product in the exchanger as follows:

0-50 gallons: 1 hour

50-200 gallon: 2 hours

200-500 gallon: 3 hours

500+ gallon: 4 hours

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor,please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
BOILER TREAT ULTRA | Delimer and Descaler | Muriatic and Hydrochloric acid replacement - 1 Gallon (Removes Scale & Lime in Steam Boilers, Hot Water Systems, Closed Loop Systems & Wood Burning Boilers)
BOILER TREAT ULTRA | Delimer and Descaler | Muriatic and Hydrochloric acid replacement - 1 Gallon (Removes Scale & Lime in Steam Boilers, Hot Water Systems, Closed Loop Systems & Wood Burning Boilers)

BEST SELLERS

...

Product Description

Boiler Treat Ultra+ tackles limescale, hard water buildup, corrosion, and impurities that slow down and reduce the efficiency of your water treatment system. This 100% acid-free formula will quickly and easily remove scale and rust from the hard-to-reach places inside your boiler without posing a danger to your personnel, equipment, or the environment like other acid-cleaners.

Boiler Treat Ultra+ is non-corrosive, non-fuming, odorless, non-irritating to the skin, and biodegrades 100% in less than 10 days, making it the safer choice for boiler cleaning. This formula comes in a liquid concentrate that dissolves 10% more scale than muriatic/hydrochloric acid, has a pH of zero, and carries a triple-zero HMIS score. Use it in your boiler, cooling tower, heat exchanger, or hot water heater to restore system efficiency the safer and easier way.

Directions

For Boilers:

  • Close down boiler for closed-loop descaling. Drain and flush the boiler.
  • Add in treatment (the equivalent of 15-20% of the boiler’s total volume). Fill the rest with water.
  • Circulate the treatment and water for three hours — or six hours for later units.
  • Drain, flush, and refill.

For the soak method, empty the boiler, then fill the boiler with one part product and one part water. Allow the mixture to soak for two to three hours. For either cleaning method, monitor the solution every half-hour using pH treat strips.

For Cooling Stations:

  • Blow down the system. Drain pump.
  • Fill the system with the product (see dilution rates below).
  • Allow the solution to circulate for three to four hours.
  • Drain, flush, and refill.

Dilution rates:

For regular descaling: 5 gallons of product per 10-ton volume.

For light descaling: 3 gallons of product per 10-ton volume.

For heat exchangers:

Prepare your closed-loop heat exchanger as usual. For a normal descale, use a 25% solution; for a lighter descale, use a 10% solution. Circle the product in the exchanger as follows:

0-50 gallons: 1 hour

50-200 gallon: 2 hours

200-500 gallon: 3 hours

500+ gallon: 4 hours

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×