TWO WAYS TO CONNECT
- Method 1: WiFi automatic configuration
- Plug the device into the power supply. Wait for about 10 seconds, prompts for "Device startup" and "Please configure WiFi".C
- lick on the configuration network or the + in the upper right corner, enter the WiFi password, and click to start configuration.D
- uring the configuration process, the device will automatically connect to the router. After the configuration is completed, it will automatically. The configured device is displayed in the device list, click to watch the video.(The first time you need to set the device password)
- Method 2: AP mode configuration network
- Plug in the power supply, enter the startup process, wait about 10 seconds, the device broadcasts voice prompts for "Device startup" and "Please configure WIFI".
- Press the RESET button on the bottom of the device again, and the device broadcasts “Network Switching”,"Waiting for a certain period of time, the device broadcasts "AP hotspot has been established".
- The phone turns on the WiFi setting and connects to the hotspot in the format of IPC-XXXXX.
- Return to the APP device list, pull down and refresh to see the connected device.
- Click Settings (set the device password for the first time) and click on Network Settings.
1. The device can work only after it is connected to the power supply.
2. This camera is only suitable for 2.4G wifi, wifi name should be English letters or numbers, no spaces and symbols. WiFi password must be correct