AC Heater Blower Motor Resistor for Audi A6 A6 Quattro 2005-2011 R8 2008-2015

YHTAUTO Affordable and Prime AC Blower Motor Resistor, Directly Fit

Fits Audi A6 2006-2011,A6 Quattro 2005-2011

Fits Audi R8 2008-2015

Reference Number: 4F0820521A,RU-610,4P1613,JA1735

1 year unlimited-mileage quality guarantee

Retail Price: $ 32.49

Wholesale Price: Inquire Now

As part of your vehicle's heating and cooling system, the blower motor resistor allows the heater or A/C to change the speed of the fan, which is actually controlled by reducing the amount of current flowing to the blower motor. It can be used to set the speed of the blower motor from low to high according to your preferences. YHTAUTO blower motor resistors are specifically designed to achieve the performance and function of OEM components.

Item Specification

Item Type: HVAC Blower Motor Resistor

Terminal Type: Blade

Connector: 6 Pins

Bolt Hole Quantity: 2

Reference Number: RU-610, 4P1613, JA1735, 4F0820521A

For Audi:

A6 2006-2011 Sedan 4-Door
A6 Quattro 2006-2011 Wagon 4-Door
A6 Quattro 2005-2011 Sedan 4-Door
R8 2011-2015 Convertible 2-Door
R8 2008-2015 Coupe 2-Door

Please confirm the vehicles' model, year as well as the install location when you purchase!


No Air Blowing Through Vehicle's Vents The blower resistor is responsible for transferring power from the battery to the blower itself, so one of the symptom of the resistance failure is that no air flows out of the car exhaust.	Blower Motor Only Working on High Speed This occurs due to the failed blower motor resistor not being able to control the flow of electric current.	Blower Motor Does Not Work on Certain Settings Another symptom of the blower motor resistor failure is that it fails or does not work at all in one or more settings.

Step1: Locate the Blower Motor Resistor

The resistor is usually located near the blower motor under the dashboard. It is most likely fixed in place by a plate with two or four screws. It is best to consult your vehicle manual, because the exact location of the resistor depends on the type of car you are using.

Step 2: Test the Fuse

First use a 12-volt test light to test the fuse when the engine is started. To do this, simply connect the wire leads of the test lamp to the bolts or any good ground. Then connect the probe of the tester to the fuse terminal. If both terminals are energized, the fuse is good. If not, the fuse must be replaced.

Step3: Test the Blower Motor

To test the power supply of the blower motor, unplug the power supply and repeat the previous step. Only this time, connect the test probe to the terminal of the motor. Repeat this process at all different motor speeds. If all terminals are energized, the motor is still in good condition. If not, it needs to be replaced.

Step4: Check the Voltage At the Relay and Electrical Connector

When testing relays and electrical connectors, current should flow into both terminals of the resistor. If one terminal is not energized, the resistance will wear out.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

AC Heater Blower Motor Resistor for Audi A6 A6 Quattro 2005-2011 R8 2008-2015

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Item Specification

Item Type: HVAC Blower Motor Resistor

Terminal Type: Blade

Connector: 6 Pins

Bolt Hole Quantity: 2

Reference Number: RU-610, 4P1613, JA1735, 4F0820521A

For Audi:

A6 2006-2011 Sedan 4-Door
A6 Quattro 2006-2011 Wagon 4-Door
A6 Quattro 2005-2011 Sedan 4-Door
R8 2011-2015 Convertible 2-Door
R8 2008-2015 Coupe 2-Door

Please confirm the vehicles' model, year as well as the install location when you purchase!


No Air Blowing Through Vehicle's Vents The blower resistor is responsible for transferring power from the battery to the blower itself, so one of the symptom of the resistance failure is that no air flows out of the car exhaust.	Blower Motor Only Working on High Speed This occurs due to the failed blower motor resistor not being able to control the flow of electric current.	Blower Motor Does Not Work on Certain Settings Another symptom of the blower motor resistor failure is that it fails or does not work at all in one or more settings.

Step1: Locate the Blower Motor Resistor

Step 2: Test the Fuse

Step3: Test the Blower Motor

Step4: Check the Voltage At the Relay and Electrical Connector

When testing relays and electrical connectors, current should flow into both terminals of the resistor. If one terminal is not energized, the resistance will wear out.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.