Inkjet Printhead Cleaner for 950 951 952XL Ink Cartridges Work with Officejet Pro 8600 8610 8620 8100 8710 8720 8216 8210 8730 Printer Cleaning kit- 100ml

Retail Price: $ 14.99

Wholesale Price: Inquire Now

Precautions:

1.After removing the ink cartridges, wrap them in a plastic wrap and put them in a ziploc bag to prevent them from drying out.

2.The printhead must be totally dry after being soaked, and then it can be installed in the printer. Otherwise it may be short-circuited, causing the printer to malfunction.

3.If it does not work, please re-wash for 2-3 times and extend the soaking time. If it fails, it is recommended to try again after one or two days.

Package Content:

1 bottle of cleaning fluid (100ML)

2 pcs of syringes (10ML)

1 user manual.

Printhead cleaner is used for 950 951 952 932 933XL ink cartridges only, not for 902XL 564XL ink cartridges. How to use? 1.Pre-heating the cleaning fluid. 2.Remove ink cartridges and the print head. 3.Choose the right type of syringe according to the color of the clogged print head that needs to be cleaned. 4.Leaving the bottom of the print head be soaked for about 8 hours. then Inject the cleaning fluid into the print head that needs cleaning with a syringe. 5.Install the print head into the ink cartridge and load the printer, then run the "nozzle cleaning" function twice in printer driver. PS: Please refer to the manual instructions for more details. Notice:1.After removing the ink cartridges, you could wrap them in plastic wrap and put them in a ziploc bag to prevent them from drying out. 2.The print head must be completely dry after being soaked, and then it can be installed in the printer. Otherwise it may cause short circuit that will lead to the damage of the print head.3.Don't skip the longer soak if the shorter ones don't work. If that fails, It is recommend to try again after a day or two.Package: 1× Printhead Cleaning Fluid(100ml) 1× Syringe(10ml) 2x Syringe tube 1× instruction manual

Risk Warning:

1. After finishing cleaning with this fluid, you need to use the printer's cleaning program for printhead cleaning, which will consume a lot of ink. Please ensure enough ink in advance.

2. Since there are several causes for printer blockage. This cleaning fluid does not ensure that all blockages will be solved. Such as:

(1) The printhead blockage is very serious or there is insoluble substances in the nozzle, this cleaning fluid might not work.

(2) The printhead is aging, the blockage situation might get worse after cleaning.

3. Since you are not a professional, there is a risk of damaging the printer when repair it by yourself, such as: when you inject the fluidinto the printhead, if there is leakage or improper operation, it will cause a short-circuit, which will lead to the circuit board burned, even the printer damaged completely. Please take this product as last attempt. We will not be responsible for the loss or damage caused by cleaning, but we will do our best to solve your problems. If it doesn't work, please contact our seller and you will get a refund.

Although there are the above risks, most customers can clean the printhead successfully under our guidance. You can decide whether this cleaning solution is worth trying according to your own situation. If you have any other questions, you can contact our seller, we will give you professional guidance.

Unlike most printer cleaning products Printers Jack cleaner doesn’t contain harmful composition which can damage your printer

It's safe and simple to use! No need to wait for a clog to ruin your print job and save your money to buy a new printer.

1

Open the printer case. When the cartridge move to the position of replacement cartridge and remove it. Open the printhead locking lever (shown by the red arrow) and take out the printhead.Heat the water in the glass in the microwave to 130 ℉-140 ℉, and then put the cleaning fluid bottle in the hot water to heat up.

2

Find a container slightly longer than the printhead(like a plastic flat cover). Pour in the cleaning solution. The depth of the cleaning solution in the container is 2 mm. (Note: the solution should not be more than 2 mm. Once cleaning fluid level exceeds 2 mm, the solution may enter the printhead circuit and damage the printhead.Leave the printhead soaked in the container for 8 hours.

3

Inhale 10ML cleaning fluid into the syringe.Insert the syringe into the ink inlet corresponding to the color to be cleaned(Take yellow inking entry for example).Push the handle of the syringe to inject the cleaning liquid into the printhead, then repeatedly push and pull the plunger of the syringe for 4 times.

(Use a container to catch the waste cleaning fluid under the nozzle to keep the table clean.)

4

After soaking, wipe away the liquid on the printhead, and make sure the printhead is totally dry. Note: If the liquid on the printhead is not totally dry, it may cause short circuit and damage the printhead.After installing the ink cartridge, select "Maintenance" -> “Print Head Cleaning” in the Printer driver. To start the cleaning cycle, and then print the “Printer Test Page” to check if the printhead is clean.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Inkjet Printhead Cleaner for 950 951 952XL Ink Cartridges Work with Officejet Pro 8600 8610 8620 8100 8710 8720 8216 8210 8730 Printer Cleaning kit- 100ml

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Precautions:

1.After removing the ink cartridges, wrap them in a plastic wrap and put them in a ziploc bag to prevent them from drying out.

2.The printhead must be totally dry after being soaked, and then it can be installed in the printer. Otherwise it may be short-circuited, causing the printer to malfunction.

3.If it does not work, please re-wash for 2-3 times and extend the soaking time. If it fails, it is recommended to try again after one or two days.

Package Content:

1 bottle of cleaning fluid (100ML)

2 pcs of syringes (10ML)

1 user manual.

Risk Warning:

1. After finishing cleaning with this fluid, you need to use the printer's cleaning program for printhead cleaning, which will consume a lot of ink. Please ensure enough ink in advance.

2. Since there are several causes for printer blockage. This cleaning fluid does not ensure that all blockages will be solved. Such as:

(1) The printhead blockage is very serious or there is insoluble substances in the nozzle, this cleaning fluid might not work.

(2) The printhead is aging, the blockage situation might get worse after cleaning.

Unlike most printer cleaning products Printers Jack cleaner doesn’t contain harmful composition which can damage your printer

It's safe and simple to use! No need to wait for a clog to ruin your print job and save your money to buy a new printer.

1

2

3

(Use a container to catch the waste cleaning fluid under the nozzle to keep the table clean.)

4

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.