- 【High Speed and High Performance】--SPEEDWOLF’s MPO to MPO Patch Cable(MPO FEMALE Connector without PIN) meet Low insertion loss and return loss(Insertion loss:<0.5dB,Return loss:≥25dB);and deliver the performance and reliability needed in todays,appliy for high-speed broadband and data networks.
- 【Sophisticated Design】--SPEEDWOLF’s MPO to MPO Patch Cable utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating,ensure fiber positioning when mating and give excellent performance.The MPO fiber optic patch cord has an aqua sheath with 8pcs 50/125μm fibers and it can support 40 GbE or 120 GbE.
- 【Multi-protocol Support】--SPEEDWOLF MPO fiber optic patch cord MMF (50 / 125um), OM3, LSZH package, 8 fibers, type B polarity (channels 1 to 8), Compatible with IEC 61754-7, TIA / EIA 604 -5, Telcordia GR 326 -CORE, IEEE802BM specification and is often used to connect MPO/MTP cases as well as QSFP + (40Gbe) / QSFP28 (100Gbe) transceivers, etc. SPEEDWOLF MPO-MPO fiber optic patch cable is fully compatible with MTP connectors.
- 【Modular Design, Easy to Install and Maintain】--The SPEEDWOLF MPO-MPO fiber optic patch cord is 8 times more density than standard connectors, saving space and wiring costs. MPO modularity in MPO cabling dramatically reduces the cost of installing, modifying and maintaining structured communication cabling for today's and tomorrow's data centers.
- 【100% SATISFIED and Lifetime Free Replacement】--If you are not happy with your buying experience, simply contact us and tell us what we can do to solve the problem! If the product fails to meet your expectations or is not as described, 60-day money-back guarantee, Lifetime Free replacement and Lifetime Friendly Customer Service.
Parameter:
- Interface Type:MPO/UPC (female) to MPO/UPC (female).
- Fiber Type:MMF(50/125um),
- OM3.Cable Length: 1M/3.3FT;Fiber Core:8 cores.
- Shell Material: LSZH.Polarity:Type B.
- Insertion loss : <0.5dB. Return loss : ≥25dB.
- Insert- pull test : 500times <0.5 dB.
- Operation temperature : -40℃～+80℃.
- Weight:15.1g/0.03lb
- Package dimensions:19.5x18x1cm/7.7x7.1x0.4in.
- Package weight:22g/0.05lb.
SPEEDWOLF MPO to MPO optical fiber patch cords allow high-density connections between network equipment in telecommunication rooms and data centers. They feature Push/Pull tab connectors that offer maximum accessibility in high density installations; The MTP/MPO connector is approximately the same size of a SC connector but since it can accommodate 8 fibers, it provides up to 8 times the density, thereby offering savings in circuit card and rack space. MPO series cables are manufactured using laser-optimized, 50/125, OM3 multimode cable, and support speeds up to 40GbE(QSFP+) and 100GbE(QSFP28).
Characteristic:
- High performance with good Insertion Loss (IL) and Return (RL) parameters
- Designed for low loss MM and SM applications.
- High precision connectors and flexible boot.
- Economical solution for massive fiber termination.
- Suitable for MPO / MTP applications
- Meets the requirements of the IEC 61754-7 standard; JIS C5982; TIA-604-5 (FOCIS5); Telcordia GR-1435-CORE, meets the EIA / TIA 568-C.3 structured cabling requirements.
- Parallel fibers: OIF (Optical Internetworking Forum); Infiniband 10G, 40G and 100G of IEEE 802.3.
- QSFP compliance.
- LSZH type cables, RoHS compliance.
- 100% factory tested
The fiber system has a higher and higher demand on fiber optic connectors with the changes from single mode fiber to multimode fiber, from 10G to 40G, 100G. Ethernet transmission of 40G and 100G also becomes the developing trend in data center cabling system. Traditional connectors are more and More difficult to achieve Multi-Fiber and High-performance. According to the International standard, high density MPO/MTP connector has been a standard port in the Ethernet transmission of 40G and 100G.
The SPEEDWOLF MPO-MPO optical fiber patch cord is 8 times denser than standard connectors, saving space and wiring costs. MPO modularity in MPO cabling dramatically reduces the cost of installing, modifying and maintaining structured communication cabling for today's and tomorrow's data centers.
Application:
- CATV DATA center
- Optical access network
- Wired in data centers
- Arrangement of the trunk cables
- Telecommunication networks
- Interconnections of optical switches
- High fiber density solutions
- Fiber optic communication networks
- CATV, LAN, WAN, CWDM, DWDM test and measurement
- QSFP + (40G) / QSFP28 (100G) Optical module
|
|
|
|
|---|---|---|
High Performance GrinderThe use of advanced grinding technology and equipment effectively reduces displacement, fiber dents, without scratching the fiber surface.High-precision machining process brings High performance with good parameters of Insertion Loss (IL) and Return Loss (RL) (insertion loss: <0.5dB, Return loss: ≥25 dB); |
8 Cores FiberSPEEDWOLF’s MPO to MPO Patch Cord MMF(50/125um), OM3, LSZH sheet, 8-core fibers cable, constructed with TYPE B (channels 1 to 8), conforming to IEC 61754-7, TIA / EIA 604-5 , Telcordia GR 326 -CORE, Telcordia GR-1435-CORE, Infiniband 10G, 40G and 100G of the IEEE 802.3, IEEE 802BM specification. |
Modular designSPEEDWOLF MPO to MPO fiber optic patch cord is 8 times denser than standard connectors, saving space and cabling costs. The MPO modularity in MPO cables dramatically reduces the cost of installation, modification and maintenance of structured communication cables in current and future data centers. |
|
|
|
|
|---|---|---|
LZSHSPEEDWOLF MPO fiber optic patch cord uses the outer layer LSZH. According to the characteristics of LSZH, it can effectively prevent the spread of fire and toxic gas emissions, thus ensuring user safety. At the same time, all our MPO fiber optic patch cord complies with RoHS. |
Strong Tensile PerformanceIt has a coating of 900µm for each fiber optic thread and kevlar protections allowing the fiber large loads of force, the lining generates excellent mechanical protection and maximum flexibility. |
Extensive CompatibilityWidely compatible with Cisco, Alcatel-Lucent, Finisar, Allied Telesis, Nokia, Huawei,TP-LINK, ZTE, Ruijie and other brands of 40G QSFP+ and 100G QSFP28 Transceivers, Switch,Router,Firewall, Media Converter, Server，Optical Fiber Network Card, Storage device, Data center and other equipment. |
BEST SELLERS
Product Description
Parameter:
- Interface Type:MPO/UPC (female) to MPO/UPC (female).
- Fiber Type:MMF(50/125um),
- OM3.Cable Length: 1M/3.3FT;Fiber Core:8 cores.
- Shell Material: LSZH.Polarity:Type B.
- Insertion loss : <0.5dB. Return loss : ≥25dB.
- Insert- pull test : 500times <0.5 dB.
- Operation temperature : -40℃～+80℃.
- Weight:15.1g/0.03lb
- Package dimensions:19.5x18x1cm/7.7x7.1x0.4in.
- Package weight:22g/0.05lb.
SPEEDWOLF MPO to MPO optical fiber patch cords allow high-density connections between network equipment in telecommunication rooms and data centers. They feature Push/Pull tab connectors that offer maximum accessibility in high density installations; The MTP/MPO connector is approximately the same size of a SC connector but since it can accommodate 8 fibers, it provides up to 8 times the density, thereby offering savings in circuit card and rack space. MPO series cables are manufactured using laser-optimized, 50/125, OM3 multimode cable, and support speeds up to 40GbE(QSFP+) and 100GbE(QSFP28).
Characteristic:
- High performance with good Insertion Loss (IL) and Return (RL) parameters
- Designed for low loss MM and SM applications.
- High precision connectors and flexible boot.
- Economical solution for massive fiber termination.
- Suitable for MPO / MTP applications
- Meets the requirements of the IEC 61754-7 standard; JIS C5982; TIA-604-5 (FOCIS5); Telcordia GR-1435-CORE, meets the EIA / TIA 568-C.3 structured cabling requirements.
- Parallel fibers: OIF (Optical Internetworking Forum); Infiniband 10G, 40G and 100G of IEEE 802.3.
- QSFP compliance.
- LSZH type cables, RoHS compliance.
- 100% factory tested
The fiber system has a higher and higher demand on fiber optic connectors with the changes from single mode fiber to multimode fiber, from 10G to 40G, 100G. Ethernet transmission of 40G and 100G also becomes the developing trend in data center cabling system. Traditional connectors are more and More difficult to achieve Multi-Fiber and High-performance. According to the International standard, high density MPO/MTP connector has been a standard port in the Ethernet transmission of 40G and 100G.
The SPEEDWOLF MPO-MPO optical fiber patch cord is 8 times denser than standard connectors, saving space and wiring costs. MPO modularity in MPO cabling dramatically reduces the cost of installing, modifying and maintaining structured communication cabling for today's and tomorrow's data centers.
Application:
- CATV DATA center
- Optical access network
- Wired in data centers
- Arrangement of the trunk cables
- Telecommunication networks
- Interconnections of optical switches
- High fiber density solutions
- Fiber optic communication networks
- CATV, LAN, WAN, CWDM, DWDM test and measurement
- QSFP + (40G) / QSFP28 (100G) Optical module
|
|
|
|
|---|---|---|
High Performance GrinderThe use of advanced grinding technology and equipment effectively reduces displacement, fiber dents, without scratching the fiber surface.High-precision machining process brings High performance with good parameters of Insertion Loss (IL) and Return Loss (RL) (insertion loss: <0.5dB, Return loss: ≥25 dB); |
8 Cores FiberSPEEDWOLF’s MPO to MPO Patch Cord MMF(50/125um), OM3, LSZH sheet, 8-core fibers cable, constructed with TYPE B (channels 1 to 8), conforming to IEC 61754-7, TIA / EIA 604-5 , Telcordia GR 326 -CORE, Telcordia GR-1435-CORE, Infiniband 10G, 40G and 100G of the IEEE 802.3, IEEE 802BM specification. |
Modular designSPEEDWOLF MPO to MPO fiber optic patch cord is 8 times denser than standard connectors, saving space and cabling costs. The MPO modularity in MPO cables dramatically reduces the cost of installation, modification and maintenance of structured communication cables in current and future data centers. |
|
|
|
|
|---|---|---|
LZSHSPEEDWOLF MPO fiber optic patch cord uses the outer layer LSZH. According to the characteristics of LSZH, it can effectively prevent the spread of fire and toxic gas emissions, thus ensuring user safety. At the same time, all our MPO fiber optic patch cord complies with RoHS. |
Strong Tensile PerformanceIt has a coating of 900µm for each fiber optic thread and kevlar protections allowing the fiber large loads of force, the lining generates excellent mechanical protection and maximum flexibility. |
Extensive CompatibilityWidely compatible with Cisco, Alcatel-Lucent, Finisar, Allied Telesis, Nokia, Huawei,TP-LINK, ZTE, Ruijie and other brands of 40G QSFP+ and 100G QSFP28 Transceivers, Switch,Router,Firewall, Media Converter, Server，Optical Fiber Network Card, Storage device, Data center and other equipment. |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
