YOURBORE Gun Cleaning kit for Rifle / Pistol or Hand Gun / Shotgun .357 /9mm.40/.45 Cal.177/.223cal.12G Firearm bore Brush Cleaner

【Suitable for Caliber】: The cleaning kit suitable for .177 cal/4.5mm, .22/223cal./5.56mm. Including 2 bronze brush, 2 cotton mop,2 brass jag, 1 utility brush, 1 patch holder, 1 muzzle guard, 1 box of cleaning patches, 1 adapter, 1 of .22cal. chamber cleaning brush,1 box of woolen pellets,4 brass rods.

【ALL BRASS】: Solid rods,slotted tips and cleaning jags are made of high quality brass,strong enough to avoid excessive bending or breaking. Comparing with brass rods and cheap plastic tips brass material, brass material is much softer than bore steel and more durable. With this set you will not experience the frustration of having a scratch on the surface of your gun barrel or a broken jag/tip inside the bore.

【Insert Tray】: A quality durable gun maintenance kit case whose design is that holding an insert tray containing gun cleaning tools; They are clearly labeled and snap securely into place keeping things organized.

【Easy to Carry】: Keeps everything neatly organized; Holds all the necessary cleaning kits; The whole set of tools is small and easy to carry around. Gift box package, a thoughtful gift for the beginner or professional gun player.

【Multiple Combinations of Recycling】: A variety of tools can be combined,and the kit can be recycled multiple times. Felt pelltets and cleaning patches in small boxes.

color:

ORANGE:.177cal,.22cal

Retail Price: $ 24.99

Wholesale Price: Inquire Now

What is this product and its General Picture

22 rifle cleaning kit 177 and 22 caliber

Rifle and air gun cleaning kit

This is a professional gun cleaning kit for rifle and air guns; One of the kit can meet both calibers .177/4.5 and .223/5.56 ;

The product Instructions I


Felt pellets Quick shooting gun cleaning felt pellets /pads Take it as a bullet to shoot, then get the bore quick cleaned.	Aluminum rotating handle Aluminum Rotating Detachable Handle. For fit the brass rod on. Note: There are 4 brass rods in the kit, one rod with "H" printed on. Use the rod and this end to connect the handle,please.	Chamber cleaning Gun chamber cleaning Use the screw hole at bottom of the handle to fit the rod with "H" on. Put the fitting adapter and screw the chamber brush on to clean the chamber	Patches and patch holder Slotted tip / Patch holder Fit the patches through the hole. Dropping solvent to clean the bore; Dropping anti rust oil to oil the bore.


Bore bronze brushes To remove rust, residues from the bore by the bronze wires. Just fitting the brush on rod; .177/4.5 mm brush fits on rod directly; .22/5.56 brush fits on rod by brass adapter.	Cotton Mops To clean the bore and keep the bore dry before putting on anti rust oil on. Just fitting the mop on rod; .177/4.5 mm mop fits on rod directly; .22/5.56 mop fits on rod by brass adapter.	Brass jag and brass fitting adapter Put proper size patch on the tip, push the jag with patch going through the bore to make the bore cleaned. Brass fitting adapter is male 5-40 / female 8-32 To fit .22 /5.56 brush in male 8-32 on rod with female 5-40.

Aluminum handle and 4 brass rods

Dislike some poor plastic handles, handle was made in high quality aluminum material.

4 solid brass rods in 4 mm are suitable for .177/4.5 bore; Straight and few connecting step help you push the rods in the bore smoothly.

More accessories in different calibers are available

If you have the kit, you can also search the related brush accessories in YOURBORE shop to meet your other caliber demands.

You will find calibers as the left picture showing : .1774.5, .223/5.56, .243/6.5 mm, .270/.28/7 mm , .308 /7.62 , .338/8.5 mm, .357/.38/9/9.3 mm, .40/.41/10 mm, .44/.45 cal. , .50 cal./28G, 20G, 16G, 12G.


	Pistol Cleaning Kit .357/9,.40,.45	Quick cleaning pellets .177-.308	Bore brush with nylon jag on	Bore rope snake cleaner	Universal gun cleaning patches all calibers	Slotted tip and adapters

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

YOURBORE Gun Cleaning kit for Rifle / Pistol or Hand Gun / Shotgun .357 /9mm.40/.45 Cal.177/.223cal.12G Firearm bore Brush Cleaner

BEST SELLERS

Product introduction

Shipping Notices

This kit Suit for Airgun & Rifle: .177cal./4.5mm, .22/223cal./5.56mm; 4 solid brass rods at 4mm diameter; 2 bore cleaning brass brushes with brass nuts; 2 bore cleaning cotton mops with brass nuts; 2 brass jags 1 aluminum handle; 1 patch holder 1 box of cleaning patches 1 .22cal. chamber cleaning brush 1 box of woolen pellets; 1 muzzle guard; 1 utility hand brush 1 brass adaptor male 5-40 / female 8-32 1 High quality storage plastic case with orange blister insert;

Product Description

What is this product and its General Picture

Rifle and air gun cleaning kit

This is a professional gun cleaning kit for rifle and air guns; One of the kit can meet both calibers .177/4.5 and .223/5.56 ;

The product Instructions I


Felt pellets Quick shooting gun cleaning felt pellets /pads Take it as a bullet to shoot, then get the bore quick cleaned.	Aluminum rotating handle Aluminum Rotating Detachable Handle. For fit the brass rod on. Note: There are 4 brass rods in the kit, one rod with "H" printed on. Use the rod and this end to connect the handle,please.	Chamber cleaning Gun chamber cleaning Use the screw hole at bottom of the handle to fit the rod with "H" on. Put the fitting adapter and screw the chamber brush on to clean the chamber	Patches and patch holder Slotted tip / Patch holder Fit the patches through the hole. Dropping solvent to clean the bore; Dropping anti rust oil to oil the bore.


Bore bronze brushes To remove rust, residues from the bore by the bronze wires. Just fitting the brush on rod; .177/4.5 mm brush fits on rod directly; .22/5.56 brush fits on rod by brass adapter.	Cotton Mops To clean the bore and keep the bore dry before putting on anti rust oil on. Just fitting the mop on rod; .177/4.5 mm mop fits on rod directly; .22/5.56 mop fits on rod by brass adapter.	Brass jag and brass fitting adapter Put proper size patch on the tip, push the jag with patch going through the bore to make the bore cleaned. Brass fitting adapter is male 5-40 / female 8-32 To fit .22 /5.56 brush in male 8-32 on rod with female 5-40.

Aluminum handle and 4 brass rods

Dislike some poor plastic handles, handle was made in high quality aluminum material.

4 solid brass rods in 4 mm are suitable for .177/4.5 bore; Straight and few connecting step help you push the rods in the bore smoothly.

More accessories in different calibers are available

If you have the kit, you can also search the related brush accessories in YOURBORE shop to meet your other caliber demands.


	Pistol Cleaning Kit .357/9,.40,.45	Quick cleaning pellets .177-.308	Bore brush with nylon jag on	Bore rope snake cleaner	Universal gun cleaning patches all calibers	Slotted tip and adapters

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.