Mikomer Little Flowers Total Blackout Privacy Window Film,100% Light Blocking Glass Door Film,Room Darkening Window Cling,No Glue/Heat Control/Anti UV for Day Sleep & High Privacy,35In. by 78.7In.
Mikomer Little Flowers Total Blackout Privacy Window Film,100% Light Blocking Glass Door Film,Room Darkening Window Cling,No Glue/Heat Control/Anti UV for Day Sleep & High Privacy,35In. by 78.7In.
  • Window film privacy level: ★★★★★, cann't see in or see out.LIGHT BLOCKING design makes your room as dark as night,perfect for day sleep and high privacy.(DON'T forget to remove backing protective film before putting on glass.)
  • No glue & static cling: no harmful substances release, easy to position and remove without any residue. Reusable: can be reused if not be damaged or smudged.
  • Control heat and anti uv window cling: solar control properties to reduce heat, glare and block out 99% harmful uv rays, protect your furniture from ageing.
  • Item size: 35*78.7 inch in roll, easily trimmed to required size with scissors or utility knife.
  • Easy application: only need some soapy water (clear water) to apply it,only use on clean and smooth glass. (Detail instructions, please see the product description below)
size:
  • 35 by 78.7-inch
Retail Price: $ 23.99
Wholesale Price: Inquire Now

Small Tips for YOU, please read before buying.

  • Please Note that This Window Film Only Applies on Smooth Glass Surfaces. Do not Apply to Outside window or Windows with Crack.
  • Don't forget to remove transparent backing side before putting on glass or it will not cling (Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).
  • TEMPERATURE ATTENTION! It's more difficult to install the static cling window film in winter than in summer. Please use a hair dryer to soften the film before applying under cold weather (Heat Resistant up to 176℉)
window film

How to install Mikomer window film?

1.Clean glass (make sure your glass is clean and smooth).

2.Please use a hair dryer to soften the film before applying under cold weather (Very important in cold weather).

3.Cut the film into required size and peel off the transparent backing film.

4.Wet glass (the more water, the better).

5.Past the smooth side to glass.

6.Scraper the film from up to down, left to right. The more water, the easier you can squeeze out bubbles.

7.Cut the excess film (leave a small gap about 1 cm between the film and window to let water flow out).

window film

Questions & Answers

Q1: Why my film does not stay?

A1: Please don't forget to remove the transparent backing film, and then wet the window with soapy water.

Q2: Too hard to remove the backing protective film, is there any tricks?

A2: Take two pieces of tape and place them on opposite sides of the same corner. Make sure you cover the corner completely but leave some tape on each side to grab onto. When you pull the tape apart the film and the backing should separate from each other easily.

Q3: I have removed the back film and wet the widow, why still can not stay?

A3: You may apply the wrong side. The film is divided into two layers, one side is smooth, and the other side is rough. Please tear it off and retry the smooth side to paste again.

Q4: There are a large number of small bubbles.

A4: Too less water. Tear it down, spray a lot of water and paste it again. And then use a card to squeeze out all water and bubbles.

Q5: Why the edge of my window film begins to fell off?

A5:(1) The edge of film is too close to the window. Please leave a small gap (about 2-3 mm) to let the water flow out so that the film can stick well.

(2) Too cold in winter. Please use a hair dryer to soften the film before applying under cold weather (Heat Resistant up to 176℉).

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor,please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
Mikomer Little Flowers Total Blackout Privacy Window Film,100% Light Blocking Glass Door Film,Room Darkening Window Cling,No Glue/Heat Control/Anti UV for Day Sleep & High Privacy,35In. by 78.7In.
Mikomer Little Flowers Total Blackout Privacy Window Film,100% Light Blocking Glass Door Film,Room Darkening Window Cling,No Glue/Heat Control/Anti UV for Day Sleep & High Privacy,35In. by 78.7In.

BEST SELLERS

...

Product Description

Small Tips for YOU, please read before buying.

  • Please Note that This Window Film Only Applies on Smooth Glass Surfaces. Do not Apply to Outside window or Windows with Crack.
  • Don't forget to remove transparent backing side before putting on glass or it will not cling (Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).
  • TEMPERATURE ATTENTION! It's more difficult to install the static cling window film in winter than in summer. Please use a hair dryer to soften the film before applying under cold weather (Heat Resistant up to 176℉)
window film

How to install Mikomer window film?

1.Clean glass (make sure your glass is clean and smooth).

2.Please use a hair dryer to soften the film before applying under cold weather (Very important in cold weather).

3.Cut the film into required size and peel off the transparent backing film.

4.Wet glass (the more water, the better).

5.Past the smooth side to glass.

6.Scraper the film from up to down, left to right. The more water, the easier you can squeeze out bubbles.

7.Cut the excess film (leave a small gap about 1 cm between the film and window to let water flow out).

window film

Questions & Answers

Q1: Why my film does not stay?

A1: Please don't forget to remove the transparent backing film, and then wet the window with soapy water.

Q2: Too hard to remove the backing protective film, is there any tricks?

A2: Take two pieces of tape and place them on opposite sides of the same corner. Make sure you cover the corner completely but leave some tape on each side to grab onto. When you pull the tape apart the film and the backing should separate from each other easily.

Q3: I have removed the back film and wet the widow, why still can not stay?

A3: You may apply the wrong side. The film is divided into two layers, one side is smooth, and the other side is rough. Please tear it off and retry the smooth side to paste again.

Q4: There are a large number of small bubbles.

A4: Too less water. Tear it down, spray a lot of water and paste it again. And then use a card to squeeze out all water and bubbles.

Q5: Why the edge of my window film begins to fell off?

A5:(1) The edge of film is too close to the window. Please leave a small gap (about 2-3 mm) to let the water flow out so that the film can stick well.

(2) Too cold in winter. Please use a hair dryer to soften the film before applying under cold weather (Heat Resistant up to 176℉).

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×