Alstar 1.25Inch Metal Collimating Cheshire Eyepiece Without Laser for Newtonian Reflector Telescope - Short Version

The short collimator for mirror (reflector) telescopes has a 45 degree plate for easier visual accuracy.

Fits in 1.25\" focusers and easy to use;simply cap the telescope, remove the diagonal, and place the eyepiece directly in the focuser.

Item was made by aluminum with crosshair at the bottom allow quick and precise centering of the optics.

This collimation eyepiece can be used for precisely collimating the Newtonian and Schmidt-Cassegrain reflector telescopes for better image quality.

For aligning optics of Newtonian reflectors, Dobsonian reflectors, and Schmidt-Cassegrain Telescopes (SCTs).

Retail Price: $ 16.99

Wholesale Price: Inquire Now

This is a great accessory for precisely collimating the optics of your Newtonian reflector telescope to achieve the best image the telescope can deliver.

The approximately 2.6" long aluminum tube is a combination sight tube and Cheshire eyepiece. Peephole in the top and wire crosshairs at the bottom allow quick and precise centering of the optics. Fits in 1.25" focusers or in 2"-1.25" adapters.
All metal construction. To use the collimating eyepiece, insert it into the eyepiece tube of your telescope and illuminate the angled ring. Sight down the tube and note the crosshair target. Center the First Mirroe (diagonal in a Newt, secondary in a CAT) on the crosshair, and adjust its tilt until the bright ring the collimator is producing is centered in the reflection. Next, adjust each successive mirror in the scope so that the image of the ring is concentric with the optic.

Professional opticians refer to this as “working BACK THROUGH the system,”

ie: adjusting each mirror in succession from the eyepiece outwards. In other words, before you align the primary on a CAT system, you have to have the secondary aligned, because it’s the first thing you see while looking up the tube.


The short collimator for mirror (reflector) telescopes has a 45 degree plate for easier visual accuracy.	Fits in 1.25" focusers and easy to use;simply cap the telescope, remove the diagonal, and place the eyepiece directly in the focuser. This collimation eyepiece can be used for precisely collimating the Newtonian and Schmidt-Cassegrain reflector telescopes for better image quality.	Item was made by aluminum with crosshair at the bottom allow quick and precise centering of the optics. For aligning optics of Newtonian reflectors, Dobsonian reflectors, and Schmidt-Cassegrain Telescopes (SCTs).

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Alstar 1.25Inch Metal Collimating Cheshire Eyepiece Without Laser for Newtonian Reflector Telescope - Short Version

BEST SELLERS

Product introduction

Shipping Notices

Product Description

This is a great accessory for precisely collimating the optics of your Newtonian reflector telescope to achieve the best image the telescope can deliver.

The approximately 2.6" long aluminum tube is a combination sight tube and Cheshire eyepiece. Peephole in the top and wire crosshairs at the bottom allow quick and precise centering of the optics. Fits in 1.25" focusers or in 2"-1.25" adapters.
All metal construction. To use the collimating eyepiece, insert it into the eyepiece tube of your telescope and illuminate the angled ring. Sight down the tube and note the crosshair target. Center the First Mirroe (diagonal in a Newt, secondary in a CAT) on the crosshair, and adjust its tilt until the bright ring the collimator is producing is centered in the reflection. Next, adjust each successive mirror in the scope so that the image of the ring is concentric with the optic.

Professional opticians refer to this as “working BACK THROUGH the system,”

ie: adjusting each mirror in succession from the eyepiece outwards. In other words, before you align the primary on a CAT system, you have to have the secondary aligned, because it’s the first thing you see while looking up the tube.


The short collimator for mirror (reflector) telescopes has a 45 degree plate for easier visual accuracy.	Fits in 1.25" focusers and easy to use;simply cap the telescope, remove the diagonal, and place the eyepiece directly in the focuser. This collimation eyepiece can be used for precisely collimating the Newtonian and Schmidt-Cassegrain reflector telescopes for better image quality.	Item was made by aluminum with crosshair at the bottom allow quick and precise centering of the optics. For aligning optics of Newtonian reflectors, Dobsonian reflectors, and Schmidt-Cassegrain Telescopes (SCTs).

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.