Siberian Bushing Polyurethane Anti Roll Sway Bar Rear Suspension Compatible with Audi A4

Manufactured from the best durable polyurethane-based elastomer which increase the service life of the parts, serving your car two-tree times longer than rubber analogues. Siberian Bushing spare parts were tested in the most severe road and weather conditions in the world - in Siberia. Ozone, oil and solvents resistant. Wear-out, tear-off and cuts resistant.

Siberian Bushing uses only high quality polyurethane compounds. Unlike the cheaper and obsolete rubber replacement parts, our parts withstand widest range of operating temperatures, stay flexible and durable even under hard loads and in extreme driving conditions.

All mount sizes (inner sleeve Inner Diameter etc.) match the original ones. If not specified, the default polyurethane hardness is 65 (Shore A) that is equivalent to original rubber material. This provides Safe and comfort driving, meantime increasing the responsiveness of your car.

Compatible with Audi A4

837901; 22-01-2181; 8E0 511 327 D

Retail Price: $ 17.95

Wholesale Price: Inquire Now

Removal and installation of the sway bar bushings

Attention! Before starting a work of the removing and installing of the sway bar bushings, take note of the location of the bushings cuttings.

Removal

Unscrew the clamp bolts of the sway bar bushings.
Remove the clamps. Take note of the location of the bushings cuttings.
Dismount the sway bar bushings.
Clean the clamps and the housing areas of the bushings and sway bar from rust and dirt. Assess the wearout and damages of the clamps and sway bar. If necessary, replace the parts.

Installation

Cut a new sway bar bushing at the same place as original one using utility knife.
Lubricate the adjacent sides of the bushings, sway bar and clamps with supplied grease or any consistent grease.
Install the bushings on the sway bar.
Adjust the clamps to the bushings, tighten clamps to the body and screw the bolts.
Tighten the bolts.

Attention! The tightening force values are specified in the vehicle manufacturer’s documentation

OEM style bushings

Siberian Bushing produce OEM style bushings which last longer than rubber counterparts and withstand extreme loads.


3600+ SKU Wide range of bushings for Domestic, Japanese, Korean and European cars.	BULK SALES FOR B2B Individual discounts for retail shops, workshops, spare parts distributors. Global distributors wanted!	PARTS FINDER You send VIN, we help you to choose.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Siberian Bushing Polyurethane Anti Roll Sway Bar Rear Suspension Compatible with Audi A4

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Removal and installation of the sway bar bushings

Attention! Before starting a work of the removing and installing of the sway bar bushings, take note of the location of the bushings cuttings.

Removal

Unscrew the clamp bolts of the sway bar bushings.
Remove the clamps. Take note of the location of the bushings cuttings.
Dismount the sway bar bushings.
Clean the clamps and the housing areas of the bushings and sway bar from rust and dirt. Assess the wearout and damages of the clamps and sway bar. If necessary, replace the parts.

Installation

Cut a new sway bar bushing at the same place as original one using utility knife.
Lubricate the adjacent sides of the bushings, sway bar and clamps with supplied grease or any consistent grease.
Install the bushings on the sway bar.
Adjust the clamps to the bushings, tighten clamps to the body and screw the bolts.
Tighten the bolts.

Attention! The tightening force values are specified in the vehicle manufacturer’s documentation

OEM style bushings

Siberian Bushing produce OEM style bushings which last longer than rubber counterparts and withstand extreme loads.


3600+ SKU Wide range of bushings for Domestic, Japanese, Korean and European cars.	BULK SALES FOR B2B Individual discounts for retail shops, workshops, spare parts distributors. Global distributors wanted!	PARTS FINDER You send VIN, we help you to choose.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.