How to use Chalk Mountains Natural Waxes
After you have finely sanded and then removed any remains of the sanding process, use a wax brush or soft cloth (old bath towels work best), apply the wax to painted surface in a circular motion, making sure to get an even coat and into the corners and crevices. Let stand for 30-40 minutes and then, using clean dry absorbent cloths, lightly wipe away excess wax from the surface, always folding your cloth so you are using a dry side to remove the excess wax. For larger pieces, you may need more than one dry cloth to effectively remove excess wax. Allow to stand for 12-15 hours. Now, with more dry absorbent cloths, wipe down the surface a second time, to pull off the remaining excess wax. No need to buff our wax. This "All Natural" wax will now dry over the next 2-3 days into a satiny semi-hard surface. Add a second coat in the same steps, if you want to add an extra coat of protection to a wear surface.