BOWSEN Garage Door Seals Bottom Weatherproof Weatherstrip Rubber Replacement Black 1/4 Inch T-End,10ft Long

This is BOWSEN brand garage door bottom weatherproofing seals, Have Applied U.S. Design Patent. U+O ring shape combination, heavy duty weatherproof parts with T-Channel Ends Style 1/4 Inches, 4 inches Width, 10FT long for your garage door retainer track

Easily Cut to fit the desired size of your 6/8 Fit Garage Door Bottom Retainer Track, Made of EPDM, Adapt to the -40°F~240°F environment

Easy to Install and Replace Existing and Old Bottom Weather Seal. No screws or nails needed to install this black garage door seal

Seals Out Weather,Blocks water from rain, snow and other sources from getting in garage

Insulator Against Weather,Helps insulate to keep warm air in and cold air out during winter and make garage more energy efficient. 2 years warranty: If damage accidental in 2 years, will get a new one for free.

Retail Price: $ 39.99

Wholesale Price: Inquire Now

Having a good garage door seal and weather seal on your garage door is important to keep out snow, leaf, water, elements. If you have an uneven garage floor you can use a larger bottom seal to help close off gaps. For extreme garage door gaps you may consider using a new garage door bottom seal along with a garage door threshold to close off gaps at the bottom of your garage door.


Step 1 Remove the old garage door seal Lift the garage door to about 6 ft. high and pull the old garage door bottom seal out through the gap behind the door track.	Step 2 Clean the track Scrape dirt and corrosion out of the garage door bottom seal track with a screwdriver and a stiff brush.	Step 3 Straighten the track Pry open the slots that serve as a track for the bottom rubber gasket on either end of the garage door, using a screwdriver. Straighten the tracks along the bottom of the door with the screwdriver to make it easier to insert the new garage door seal.If your door currently does not have the ability to accept this style of weather seal, consider replacing the bottom retainer on the door.	Step 4 Lubricate the rubber and install Mix a drop or two of dish detergent or other soap in a spray bottle filled with water. Spray the soapy mixture on the track and new gasket to serve as a lubricant. To make it easier to feed the new gasket onto the track, hold the gasket at the same level as the track about 12 inches outside the door, then push and pull the new garage door bottom seal into the track.

Rubber seals are made of durable black EPDM synthetic rubber, and is more durable and and flexible than vinyl, and withstands extreme weather temperatures ranging from -40 to 240 degrees. Our garage door seals are generic and fit many types of residential and commercial garage doors.


ASIN: X0023R9DOD BOWSEN Garage Door Bottom Weather Seal with Retainer	ASIN: B07Q6N2PDC BOWSEN Universal Garage Door Bottom Seals with Aluminum Track Retainer	ASIN: B01IJ9Y39C BOWSEN Garage Door Threshold Seal (16 FT)

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

BOWSEN Garage Door Seals Bottom Weatherproof Weatherstrip Rubber Replacement Black 1/4 Inch T-End,10ft Long

BEST SELLERS

Product introduction

Shipping Notices

Product Description


Step 1 Remove the old garage door seal Lift the garage door to about 6 ft. high and pull the old garage door bottom seal out through the gap behind the door track.	Step 2 Clean the track Scrape dirt and corrosion out of the garage door bottom seal track with a screwdriver and a stiff brush.	Step 3 Straighten the track Pry open the slots that serve as a track for the bottom rubber gasket on either end of the garage door, using a screwdriver. Straighten the tracks along the bottom of the door with the screwdriver to make it easier to insert the new garage door seal.If your door currently does not have the ability to accept this style of weather seal, consider replacing the bottom retainer on the door.	Step 4 Lubricate the rubber and install Mix a drop or two of dish detergent or other soap in a spray bottle filled with water. Spray the soapy mixture on the track and new gasket to serve as a lubricant. To make it easier to feed the new gasket onto the track, hold the gasket at the same level as the track about 12 inches outside the door, then push and pull the new garage door bottom seal into the track.


ASIN: X0023R9DOD BOWSEN Garage Door Bottom Weather Seal with Retainer	ASIN: B07Q6N2PDC BOWSEN Universal Garage Door Bottom Seals with Aluminum Track Retainer	ASIN: B01IJ9Y39C BOWSEN Garage Door Threshold Seal (16 FT)

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.