Accusize Industrial Tools 3/4'' x 10'' Rh Sclcr Indexable Boring Bar with 10 Pcs Ccmt Carbide Cvd Coating Insert, P252-S407Ins

[]

size:

3/4" with CCMT32.5 inserts

Retail Price: $ 82.77

Wholesale Price: Inquire Now

Accusize - 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10 Pcs CCMT32.51 Carbide CVD Coating Insert, #P252-S407INS:

Including:

1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar
and 10 pcs CCMT32.51 inserts

Specifications of the boring bar and the inserts (you may also purchase indivadual item by searcing its SKU)


Boring bar: S12S-SCLCR3 Shank Dia.: 3/4 inch OAL: 10 inch Accept CCMT32.51/32.52; CCGT32.51 Comes with 1 pc CCMT insert installed Extremely fine gloss finish Utilizes 80° diamond CCMT inserts Negative 5° end and side cutting angle SKU P252-S407	CCMT 32.51 inserts ISO: CCMT09T304-MD I.C: 3/8 inch Thickness: 5/32 inch Hole: 11/64 inch Radius: 1/64 inch SKU 2200-1014x10

Features of chipbreaker:

For medium-duty turning
With broad capability for steel, stainless steel, grey and nodular cast-iron
Operations: turning, facing and profiling
Advantages: all-round, reliable with problem-free machining
Limitations: depth of cut and feed, risk of overloading the cutting edge
Components typically: axles, shafts, hubs, gears, etc.

Product Features:

BPS101 Black/Yellow
Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.
Can bear high temperatures.
For steel and steel castings finishing to roughing processing.
Continue cutting to light interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed.
For hard materials continuous cutting and light interrupted cutting from finishing to roughing.
Wet and dry processing.
Combination of fibrous TICN and fine grained Al2O3 increases abrasion resistance and anti-chipping.
Preferred choice chip breaker on General Purpose Finishing

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Accusize Industrial Tools 3/4'' x 10'' Rh Sclcr Indexable Boring Bar with 10 Pcs Ccmt Carbide Cvd Coating Insert, P252-S407Ins

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Accusize - 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10 Pcs CCMT32.51 Carbide CVD Coating Insert, #P252-S407INS:

Including:

1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar
and 10 pcs CCMT32.51 inserts

Specifications of the boring bar and the inserts (you may also purchase indivadual item by searcing its SKU)


Boring bar: S12S-SCLCR3 Shank Dia.: 3/4 inch OAL: 10 inch Accept CCMT32.51/32.52; CCGT32.51 Comes with 1 pc CCMT insert installed Extremely fine gloss finish Utilizes 80° diamond CCMT inserts Negative 5° end and side cutting angle SKU P252-S407	CCMT 32.51 inserts ISO: CCMT09T304-MD I.C: 3/8 inch Thickness: 5/32 inch Hole: 11/64 inch Radius: 1/64 inch SKU 2200-1014x10

Features of chipbreaker:

For medium-duty turning
With broad capability for steel, stainless steel, grey and nodular cast-iron
Operations: turning, facing and profiling
Advantages: all-round, reliable with problem-free machining
Limitations: depth of cut and feed, risk of overloading the cutting edge
Components typically: axles, shafts, hubs, gears, etc.

Product Features:

BPS101 Black/Yellow
Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.
Can bear high temperatures.
For steel and steel castings finishing to roughing processing.
Continue cutting to light interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed.
For hard materials continuous cutting and light interrupted cutting from finishing to roughing.
Wet and dry processing.
Combination of fibrous TICN and fine grained Al2O3 increases abrasion resistance and anti-chipping.
Preferred choice chip breaker on General Purpose Finishing

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.