kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K (SMD pre-soldered)

Retail Price: $ 39.89

Wholesale Price: Inquire Now

Simple DIY oscilloscope kit - includes everything you need to build your very own oscilloscope! A clip probe and plastic enclosure are included.

Kindly Remind:

DSO Shell runs on 9V (do not use power voltage higher than 10V!)

Power Supply is not included

Specification:

Number of Channel: 1

Analog Bandwidth: 0 - 200KHz

Sensitivity: 5mV/Div - 20V/Div

Sensitivity error: < 5%

Resolution: 12-bit

Input Impedance: 1M ohm

Maximum Input voltage: 50Vpk

Coupling: DC, AC, GND

Trigger Modes: Auto, Normal, Single

Trigger Types: Rising/falling edge

Trigger Position: 1/2 of buffer size fixed

Display: 2.4 inch color TFT LCD with 320 x 240 resolution

Power Supply: 9V DC (8 - 10V acceptable) NOT INCLUDED

Dimension: 115mm X 75mm X 22mm

Weight: 100 gram (not including cables and power supply)

Features


Updated Version DSO Shell DIY kit comes with a full molded plastic enclosure. The panels are flexible for easy user installation and modification.	Flexible Rotary Encoder A rotary encoder has also been added to make parameter adjustment quick and painless. The sensitivity of DSO Shell has also been improved over DSO138. DSO Shell is capable of 5mV/div through 20V/div.	SMD Pre-soldered The 2.4" color TFT LCD display and microcontroller are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. The analog channel is on a separate daughterboard PCB to provide better separation between the analog and digital portions of the design. Without the analog daughterboard the mainboard is actually a general purpose control board that can be used in many other applications. Aside from a few through-hole components, the mainboard is fully assembled. It is also factory-tested before shipment to ensure your kit will function as expected.


Have Fun on Building Your Own Oscilloscope This is a simple DIY oscilloscope kit which includes everything you need to build your very own oscilloscope! A clip probe and plastic enclosure are included.	Detailed Instruction Manual Provided Detailed assembly instructions, troubleshooting guide and schematic are provided.	Package Contents DSO Shell DIY kit with SMD parts on analog board pre-soldered BNC-clip cable Users Manual

Notice

1.DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply.

2.Users need to prepare their own power supply since it is not included in the kits.

3.The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.


	5 MHz Handheld Digital Oscilloscope	DSO 138 DIY Kit	DSO Shell DIY Kit	Mega 328 Graphic transistor Tester	100:1 High Voltage Probe	2 X 100MHz Oscilloscope Clip Probes

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K (SMD pre-soldered)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Simple DIY oscilloscope kit - includes everything you need to build your very own oscilloscope! A clip probe and plastic enclosure are included.

Kindly Remind:

DSO Shell runs on 9V (do not use power voltage higher than 10V!)

Power Supply is not included

Specification:

Number of Channel: 1

Analog Bandwidth: 0 - 200KHz

Sensitivity: 5mV/Div - 20V/Div

Sensitivity error: < 5%

Resolution: 12-bit

Input Impedance: 1M ohm

Maximum Input voltage: 50Vpk

Coupling: DC, AC, GND

Trigger Modes: Auto, Normal, Single

Trigger Types: Rising/falling edge

Trigger Position: 1/2 of buffer size fixed

Display: 2.4 inch color TFT LCD with 320 x 240 resolution

Power Supply: 9V DC (8 - 10V acceptable) NOT INCLUDED

Dimension: 115mm X 75mm X 22mm

Weight: 100 gram (not including cables and power supply)

Features


Updated Version DSO Shell DIY kit comes with a full molded plastic enclosure. The panels are flexible for easy user installation and modification.	Flexible Rotary Encoder A rotary encoder has also been added to make parameter adjustment quick and painless. The sensitivity of DSO Shell has also been improved over DSO138. DSO Shell is capable of 5mV/div through 20V/div.	SMD Pre-soldered The 2.4" color TFT LCD display and microcontroller are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. The analog channel is on a separate daughterboard PCB to provide better separation between the analog and digital portions of the design. Without the analog daughterboard the mainboard is actually a general purpose control board that can be used in many other applications. Aside from a few through-hole components, the mainboard is fully assembled. It is also factory-tested before shipment to ensure your kit will function as expected.


Have Fun on Building Your Own Oscilloscope This is a simple DIY oscilloscope kit which includes everything you need to build your very own oscilloscope! A clip probe and plastic enclosure are included.	Detailed Instruction Manual Provided Detailed assembly instructions, troubleshooting guide and schematic are provided.	Package Contents DSO Shell DIY kit with SMD parts on analog board pre-soldered BNC-clip cable Users Manual

Notice

1.DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply.

2.Users need to prepare their own power supply since it is not included in the kits.

3.The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.


	5 MHz Handheld Digital Oscilloscope	DSO 138 DIY Kit	DSO Shell DIY Kit	Mega 328 Graphic transistor Tester	100:1 High Voltage Probe	2 X 100MHz Oscilloscope Clip Probes

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.