AG8 Callouts
1. 1/4" Phone Plug - Insert this standard 1/4” plug into your electric guitar or electric bass. If you need to change the phone plug configuration, simply remove the thumbscrew from the covered jack position, unscrew the plug and reinstall the two components while swapping their positions.
2. IR Lens - This window is used to capture the infrared signal sent from the CR88 receiver during the IR SET to channelize the transmitter. The IR Lens is only active for the first 10 seconds the transmitter is powered on.
3. Status LED - This two color indicator shows the status of the AG8 transmitter.
4. Mute Switch - This switch is used to temporarily turn off the audio output of the transmitter. Move this switch in the direction of 'MUTE' to turn off the output and move the switch in the direction of 'ON' to turn the audio on.
5. Power switch - Move this switch in the direction of the arrow to turn the AG8 power on; move it to the right to turn the power off.
6. Antenna - This permanently attached flexible antenna should be fully extended during normal operations.