How to use glue gun sealing wax to decorate your parcel / wedding invitation / greeting thanks card/ or gift packaging?

1. Slide a wax glue stick into the back of the mini glue gun (20W)

2. Then plug the cord into the nearest outlet

3. Give the gun minutes to warm up so the wax can soften

4. Then, aim the nozzle close to the card or envelope or gift box, and lightly squeeze the trigger to release the melted wax glue,

If the melted wax will not come out, use another stick to squeeze

5. Put the stamp on the wax glue, and press it slightly

6. Take off the stamp after the wax cool

Here are 28 colors for choose

How to use the smaller sealing wax in standard size glue gun

Step 1: Insert your wax stick into your standard sized glue gun. Use a second wax stick in the gun to help advance the first.

Step 2: Heat up the glue gun with the wax inserted for about 1-2 minutes.

Step 3: Moisten your stamp on a damp paper towel to prevent the wax from sticking to your stamp.

Step 4: Pull the trigger to release the desired amount of wax onto your project and wait 5 to 8 seconds.

Step 5: Press down on the hot wax.

Step 6: Let the stamp set for a few seconds before lifting it from the wax.

Pro tips: If you find the stamp stuck to the wax, let it rest until the stamp has cooled. Then you should be able to easily release your stamp from the wax. We recommend resting your seal on ice before embossing the hot wax and ensure you wipe away any excess moisture before stamping - this will quick set the wax, and allow the seal to easily release.