ANCEL BST200 is a classic battery analyzer and dedicatedly developed for both beginners and professional technicians. It detects all automotive 12V lead-acid battery with a capacity of 100 to 1100 CCA, including regular flooded, AGM flat plate, AGM spiral, as well as GEL batteries. The battery tester provides a quick, easy and accurate test result in only 3 seconds for you to view battery charging status, check battery health status and detect faults.
Product Key Features:
1. Works on 12V lead-acid battery, CCA100 - 1100, 30 - 100Ah.
2. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB.
3. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc.
7. Suitable for automobile factory, garage, auto battery manufacturer, and DIY enthusiasts, etc.
TEST BATTERY THE EASY WAY
Support Battery Standards
You can test the battery based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB standards.
Why You Need This Battery Load Tester?
Select the detection program according to the location/type/standard of the battery, the battery tester will start working and quickly giving you the battery's CCA value, CCA rated, health state(%), charge state(%), voltage(V), internal resistance(Ω), etc. Through analyzing the test data, you can check the health of the battery and judge whether it is in a good condition or needs to be replaced, to avoid accidents caused by battery failure. Small compact design makes it easy to carry and store.
Do not connect the tester to a voltage source more than 18V DC; otherwise you may damage the tester.
If you are testing an in-vehicle battery, please make sure all accessory load are cut off, the key is not in the ON position and the door are closed.
BST200 battery analyzer can detect all automotive 12V lead-acid batteries, such as regular flooded, AGM flat plate, AGM spiral, and GEL batteries of cars, SUV, light trucks, motorcycle, and more. It gives you accurate test results in only 3 seconds based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB rating standards.
Check Your Batteries Anywhere
Whether you are a professional mechanic or car owner, you can use this tester to analyze the battery health status, view battery charging status, and detect faults anytime and anywhere. It comes with 2 test menus "IN VEHICLE" and "OUT OF VEHICLE", which allows you to test a battery according to its location, so you'll get a more accurate test result quickly, and replace the bad cell in time.
Don't Worry About the Safety
It's designed with polarity reverses connection protection, and it does not emit light, heat, spark, and discharge to safeguard all users, the vehicle, the battery and the device itself.
Please note: connect the red clamp to the positive(+) terminal and the black clamp to the negative(-) terminal.
ANCEL BST200 is a classic battery analyzer and dedicatedly developed for both beginners and professional technicians. It detects all automotive 12V lead-acid battery with a capacity of 100 to 1100 CCA, including regular flooded, AGM flat plate, AGM spiral, as well as GEL batteries. The battery tester provides a quick, easy and accurate test result in only 3 seconds for you to view battery charging status, check battery health status and detect faults.
Product Key Features:
1. Works on 12V lead-acid battery, CCA100 - 1100, 30 - 100Ah.
2. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB.
3. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc.
7. Suitable for automobile factory, garage, auto battery manufacturer, and DIY enthusiasts, etc.
TEST BATTERY THE EASY WAY
Support Battery Standards
You can test the battery based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB standards.
Why You Need This Battery Load Tester?
Select the detection program according to the location/type/standard of the battery, the battery tester will start working and quickly giving you the battery's CCA value, CCA rated, health state(%), charge state(%), voltage(V), internal resistance(Ω), etc. Through analyzing the test data, you can check the health of the battery and judge whether it is in a good condition or needs to be replaced, to avoid accidents caused by battery failure. Small compact design makes it easy to carry and store.
Do not connect the tester to a voltage source more than 18V DC; otherwise you may damage the tester.
If you are testing an in-vehicle battery, please make sure all accessory load are cut off, the key is not in the ON position and the door are closed.
BST200 battery analyzer can detect all automotive 12V lead-acid batteries, such as regular flooded, AGM flat plate, AGM spiral, and GEL batteries of cars, SUV, light trucks, motorcycle, and more. It gives you accurate test results in only 3 seconds based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB rating standards.
Check Your Batteries Anywhere
Whether you are a professional mechanic or car owner, you can use this tester to analyze the battery health status, view battery charging status, and detect faults anytime and anywhere. It comes with 2 test menus "IN VEHICLE" and "OUT OF VEHICLE", which allows you to test a battery according to its location, so you'll get a more accurate test result quickly, and replace the bad cell in time.
Don't Worry About the Safety
It's designed with polarity reverses connection protection, and it does not emit light, heat, spark, and discharge to safeguard all users, the vehicle, the battery and the device itself.
Please note: connect the red clamp to the positive(+) terminal and the black clamp to the negative(-) terminal.
View freeze frame data/Live data stream/DTC look-up etc.
Test regular flooded, AGM flat plate, AGM spiral, GEL battery
Turn off the check engine light
I/M monitor Readiness test/EVAP system test
4 working modes: DC/AC voltage/Resistance/Diode
Storage battery test,Maximum load system test
Battery Standards
Read/clear ABS, SRS, Transmission error codes & View live data in graph
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB
View freeze frame data/read live data stream
Display battery voltage/Trip management/Performance test
Continuity test/Activate components/Voltage & polarity/Signal circuit test etc.
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB
Test Result
Print Data
SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc.
I/M monitor readiness test
Three alarm tone/Exclusive free App/Vent magnetic mount
Testing trailer lights and connections
Engine system activation load test, Charging system test
Internet Update
✓
Designed with polarity reverses connection protection
✓
20 feet extension cord
Built-in thermal printer
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.