Handheld Bidet Toilet Sprayer SROSS Handheld Bidet Sprayer for Toilet with Adjustable Pressure Control for Feminine Wash, Baby Diaper Cloth and Shower Sprayer for Pets Shower, Wall or Toilet Mount

Retail Price: $ 6.97

Wholesale Price: Inquire Now

Two Different Installation Methods

you can choose mounted on the toilet or on a wall according to your needs.

Two Water Pressure Modes

The handheld bidet sprayer has 2 water pressure modes, Jet spray and Soft spray modes.

Control the water pressure for a gentle and thorough clean up.

Installation Steps

1.Turn off water feed
2.Disconnect toilet hose from flush tank
3.Connect T-adapter to flush tank
4.Connect toilet hose to T-adapter
5.Connect other end of shower hose to sprayer
6.Turn water feed back on
7.Screw bracket to wall or screw bracket to hook then mount on the tank.
8.When installing the T valve, the raw material belt needs to be wound to avoid water leakage.

STEP 1: TURN OFF THE WATER SUPPLY

Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.

STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS

Confirm that the flat rubber washer is inside the top of your bidet’s T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.

Step 3: Connect the T-Valve and the Hoses

Screw the top of the T-valve onto the toilet’s fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet’s water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.

Step 4: Turn On the Water Supply & Mount the Sprayer

Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Handheld Bidet Toilet Sprayer SROSS Handheld Bidet Sprayer for Toilet with Adjustable Pressure Control for Feminine Wash, Baby Diaper Cloth and Shower Sprayer for Pets Shower, Wall or Toilet Mount

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Two Different Installation Methods

you can choose mounted on the toilet or on a wall according to your needs.

Two Water Pressure Modes

The handheld bidet sprayer has 2 water pressure modes, Jet spray and Soft spray modes.

Control the water pressure for a gentle and thorough clean up.

Installation Steps

1.Turn off water feed
2.Disconnect toilet hose from flush tank
3.Connect T-adapter to flush tank
4.Connect toilet hose to T-adapter
5.Connect other end of shower hose to sprayer
6.Turn water feed back on
7.Screw bracket to wall or screw bracket to hook then mount on the tank.
8.When installing the T valve, the raw material belt needs to be wound to avoid water leakage.

STEP 1: TURN OFF THE WATER SUPPLY

Turn OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.

STEP 2: MAKE SURE THERE IS A RUBBER WASHER INSIDE BOTH THE FEMALE ENDS

Step 3: Connect the T-Valve and the Hoses

Step 4: Turn On the Water Supply & Mount the Sprayer

Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber’s tape. If you’re leak-free, your hand-held bidet sprayer is installed and ready for use!
Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.
Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.