This emergency taper mold makes for a great addition to your homes safety equipment for those unexpected power outages. If you are new to candle making or a professional you'll find the Candle Flex Molds to be easy to use. Our durable, flexible molds will last for hundreds of pouring's, giving you beautiful candles and ornaments time after time. This is only the mold to make the candle. Candle not included. Color of mold material may vary.
Quality, innovative products and superior service has always set us apart from the competition and fueled our growth, making us the world
leader in the beekeeping industry.We love sharing our passion and knowledge with you.We have everything you need!
At Mann Lake, We Know Bees
Candle Mold Instructions Part 1
Lightly spray your mold with Mold Release.
Candle Mold Instructions Part 2
Use a wicking needle to thread the wick through the
hole in the bottom of the mold. Pull the wick so that
it is about 6” (15.24 cm) longer than the top of the
mold. Leave the wick at the bottom of the mold long,
that way when you remove the candle, the mold will rewick itself!
Candle Mold Instructions Part 3
Most molds have at least one cut in the side. Take
the time to make sure that the seam(s) are aligned
properly. This process will alleviate the need to repair
a bad seam on your candle.
Candle Mold Instructions Part 4
Use the rubber bands included with your mold to
secure the seams in place, readjusting if necessary
after the rubber bands are in place.
Candle Mold Instructions Part 5
Secure your wick over the mold. Bobby pins or
popsicle sticks work great for this purpose. You want
the wick centered and straight but not too tight. A
wick that is too tight or too loose will effect the way
your candle burns. Pour your melted wax into the mold slowly.
Candle Mold Instructions Part 6
The slower your candle cools, the better it will turn
out. Once your candle is completely cooled, remove
the rubber bands and pull the seam(s) apart. Remove
the candle from the mold and trim the wick at the top
and bottom of the candle.
Finishing Touches on your Candle.
Your mold is now wicked and ready for your next pouring. The bottom of the candle is likely to be uneven. Use a metal pie
tin on the stove to gently warm the bottom of the candle and flatten it out so the candle will sit level.
Congratulations, you are now a candle maker!
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.