Counter Sink Bit
Counter sink. Allows the head of a countersunk bolt or screw, when placed in the hole, to sit flush with the surface for a perfect finish
- 50mm
- Also used to remove burrs and round-off holes
|
Metal and Plastics
High-Speed Steel (HSS) bits, stronger than normal high-carbon steel, for metals and plastics.
- Titanium coated for improved wear resistance and reduced friction.
- 9 Piece 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 15/64
- NB. Maximum drilling capacity into 4mm of non heat-treated steel plate
|
Masonry, Brick, and Stone
Masonry bits with Tungsten-Carbide tips ensure greater and longer-lasting strength against brick walls by breaking up stone and masonry particles.
- Tungsten-Carbide tips for pushing through hard material
- 4 Piece 5/32", 3/16",15/64", 5/16"
- NB. Not suited for Concrete drilling
|
Wood and Plastics
Brad point bits for wood and plastics with piercing tips for accurate drilling starts and sharpened edges for easy cutting & churning out
- Sharpened tips to piece through soft materials
- 5 Piece 7/64", 5/32", 3/16", 15/64", 5/16"
|