CleanPro Sticky/Tacky Mat Aluminum Frame (18" x 45", Aluminum Frame)

Composed of anodized aluminum, with a polyethylene center where the mat is installed

Non-skid backing layer

Prevents folding, upheaval, deforming, and movement of sticky mat during high volume foot or equipment traffic

Moveable base is relocatable for cross-functional use or during cleaning procedures

Made in the USA

Retail Price: $ 226.88

Wholesale Price: Inquire Now

Not Just for Cleanrooms Anymore!

For years, sticky mats have been a fixture at the entrances of laboratory and production facilities in pharmaceutical, medical, food processing and other technical environments. Now, other manufacturing and commercial facilities are discovering their value as a simple component of an overall facility maintenance program.

Anywhere foot traffic transitions from a dirty to a clean environment, sticky mats deliver value. When placed at the entrance to offices from a factory floor, sticky mats will remove most of the dirt and grime that is carried in on the soles of shoes - often for less than 0.50 cents a day!

Each sticky mat contains 30 layers per mat (4) mats per case of polyethylene film coated with a water soluble acrylic-based adhesive. When the top layer of the mat is soiled, peel it off for another clean layer. Mat adhesive does not contain benzoic acid.

Strong, non-toxic adhesive coating.
Uniform adhesion for each layer.
Numbered corner pull-tabs indication number of remaining layers.
Standardized and customized sizes and colors.
Suitable for both cleanroom and general applications.

CleanPro Tacky Mat Installation


Prepare the Area Where the Mat Will Be Placed Select a hard, flat, dry, smooth, and clean surface. Mats should be room temperature before installing, as cold temperatures will affect the adhesive properties. Clean the placement area, removing any residue and dirt from the placement area. We recommend using 70% Isopropyl Alcohol and a heavy-duty low-lint wipe or cloth to remove any previously existing adhesive or grime.	Test the Mat Placement Do not remove any film layers before testing the placement of the mat. Identify the top and bottom of the mat. The blue tab indicates the adhesive backing layer (face down). The top layer is blank with numbers in the corner (under the protective cover layer)(face up). Align the mat so the longest side is at a 90° angle to the door. This placement ensures three full steps for maximum dirt removal and prevents mat pull-ups. Make sure the mat does not interfere with any door openings or closings and ensure that the numbered pull tabs are easily accessible.	Installing the Mat Do not remove the top layer (yet). Starting with the blue tab, peel off the backing to expose 2-3" of the adhesive. Adhere the edge with the exposed adhesive to the floor, taking care to avoid air bubbles. Once you've ensured the adhered edge is flat and straight, slowly press the rest of the mat to the floor, working from the front edge towards the back. Use your hand, or an empty cardboard tube to press and remove any air bubbles. One placed, ensure the mat is firmly affixed and smooth out any air bubbles.	Removing the Top Layer Starting from the numbered corner, remove the top protective layer. Peel slowly with consistent tension. When the top layer becomes soiled, remove it to expose the next layer as needed. For soiled layers, peel sides and corners toward the center of the mat to prevent debris or grit from contacting clean surfaces.

CleanPro Aluminum Tacky Mat Frame

Improper Storage Leads to Damage

Improper storage will result in damaging wrinkles or creases.

Always store mats flat
Store mats in temperature controlled environments

Solving Common Tacky Mat Issues

Proper Handling and Storage will Protect Your Mats & Increase Efficiency

For added versatility, use a CleanPro Sticky Mat Frame. The anodized aluminum frame, polyethylene center, and sturdy graded edges provide an inert and non-contaminating transition for foot and cart trafﬁc.

Some soft, porous, fibrous, dirty, or degraded surfaces will simply not support adhesion.
Installing sticky mats on these types of surfaces may cause bubbles, pull-ups, and affect the adhesion between the mat and the ﬂoor.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

CleanPro Sticky/Tacky Mat Aluminum Frame (18" x 45", Aluminum Frame)

BEST SELLERS

Product introduction

Shipping Notices

Sticky mats are designed to adhere aggressively to particulate, but often times, carts, mops, garments, shoe covers, and other traffic sources adhere with equal and unfavorable tact. The result is a mat that pulls-up, deforms, shifts, folds or doesn't remove particulate evenly. Sticky mat frames provide a moveable base for mounting adhesive floor mats without the limitations of mats secured directly to the floor. CleanPro aluminum sticky mat frames expand the applications where floor mounted sticky mats are either inconvenient or impossible, such as carpeted, concrete, grimy, oily, damp or temporary walkways. Likewise, the anodized aluminum frame and polyethylene center improves passthrough and prevents upheaval when using roller carts, removing film layers, or when refreshed mats are extra tacky. The material construction provides an inert and non-contaminating solution for foot and cart traffic at cleanroom entrances, offices, warehouses, manufacturing sites, hospitals, construction sites and more. CleanPro's wide assortment of sticky mat frame sizes grant greater flexibility and minimal interference when your location or application changes.

Product Description

Not Just for Cleanrooms Anymore!

Strong, non-toxic adhesive coating.
Uniform adhesion for each layer.
Numbered corner pull-tabs indication number of remaining layers.
Standardized and customized sizes and colors.
Suitable for both cleanroom and general applications.

CleanPro Tacky Mat Installation


Prepare the Area Where the Mat Will Be Placed Select a hard, flat, dry, smooth, and clean surface. Mats should be room temperature before installing, as cold temperatures will affect the adhesive properties. Clean the placement area, removing any residue and dirt from the placement area. We recommend using 70% Isopropyl Alcohol and a heavy-duty low-lint wipe or cloth to remove any previously existing adhesive or grime.	Test the Mat Placement Do not remove any film layers before testing the placement of the mat. Identify the top and bottom of the mat. The blue tab indicates the adhesive backing layer (face down). The top layer is blank with numbers in the corner (under the protective cover layer)(face up). Align the mat so the longest side is at a 90° angle to the door. This placement ensures three full steps for maximum dirt removal and prevents mat pull-ups. Make sure the mat does not interfere with any door openings or closings and ensure that the numbered pull tabs are easily accessible.	Installing the Mat Do not remove the top layer (yet). Starting with the blue tab, peel off the backing to expose 2-3" of the adhesive. Adhere the edge with the exposed adhesive to the floor, taking care to avoid air bubbles. Once you've ensured the adhered edge is flat and straight, slowly press the rest of the mat to the floor, working from the front edge towards the back. Use your hand, or an empty cardboard tube to press and remove any air bubbles. One placed, ensure the mat is firmly affixed and smooth out any air bubbles.	Removing the Top Layer Starting from the numbered corner, remove the top protective layer. Peel slowly with consistent tension. When the top layer becomes soiled, remove it to expose the next layer as needed. For soiled layers, peel sides and corners toward the center of the mat to prevent debris or grit from contacting clean surfaces.

CleanPro Aluminum Tacky Mat Frame

Improper Storage Leads to Damage

Improper storage will result in damaging wrinkles or creases.

Always store mats flat
Store mats in temperature controlled environments

Solving Common Tacky Mat Issues

Proper Handling and Storage will Protect Your Mats & Increase Efficiency

Some soft, porous, fibrous, dirty, or degraded surfaces will simply not support adhesion.
Installing sticky mats on these types of surfaces may cause bubbles, pull-ups, and affect the adhesion between the mat and the ﬂoor.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.