SeaStar Solutions SS141xx Back Mount Rack Steering System
Traditional SeaStar Solutions (formerly Teleflex Marine) mechanical rack steering is still the choice for sterndrives, inboards and other power-assisted applications. It's just right for power-steered boats in which No-Feedback Systems are not Required.
The Back Mount Rack Steering System features the precision and comfort of four turns lock-to-lock with a cable and helm that install easily from behind the dash. In single cable configurations, this is the best 4-turn choice for power-steered boats.
Suitable For:
- Virtually all Power-Assisted Sterndrive and Inboard Boats with Wheels up to 16-inch Diameter.
- SS141xx Replaces 1984 and Newer SeaStar Solutions 'The Rack' Steering without dash modification (Requires use of SSC134xx Back Mount Rack Cable Enclosed).
Kit Contains the Following:
(1) SH5210P Helm; (1) SB39526P 90 Degree Bezel Kit; (1) SSC134xx Steering Cable; Hardware and Instruction Sheets.
Note: This System is for Single Station use ONLY. Components are available for Dual Cable Systems, but we Recommend No Feedback (NFB) Steering for all Dual Cable Steered, Non-Power Assisted Outboards. This System is only recommended as a replacement for the original system as installed by the boat manufacturer. SeaStar Solutions always recommends NFB Helms for Outboard Applications.
Note: SSC124xx Old Style Rack Cables cannot be used with these systems.
Wedge Kit Option: If you wish to have your Steering Wheel and Helm on a 20 Degree Angle to the Face of your Dash, Order Kit SB27449P Separately.