- Made from high-strength 130,000 PSI Austempered Ductile Iron castings, 4x stronger than cast iron vises and 50% stronger than Forged Steel Vise (FSV) Series.
- Large 4.25\" x 4.63\" anvil work surface
- 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
- Machined Q235 steel main screw 0.98\"D with rolled single acme threads at 5 threads per inch
- Replaceable Hardened Steel Serrated (Top) Jaws and Pipe Jaws
- 0.75\"D x 9.8\"Long handle with rubber bumpers
- Base mounting tabs: (3) x 3/8\"D, mounting hardware not included.
- Casting Clamp force: 20,000 lbs and Torque rating: 475 Ft-Lb
- Jaw Width: 8\" x Jaw Opening: 9.5\" x Throat Depth: 4.5\" x Pipe Capacity: 0.5\"D x 4.0\"D
- Warranty: Castings are limited lifetime
Yost - Since 1908
Yost has been building tools for 100 years. Our staff is always ready to answer any questions you may have.
Yost Forged Steel Vises
Extreme Strength
Made from 130,000 PSI Austempered Ductile Iron, the Yost ADI-8 line of vises is both lightweight and strong . These vises are designed for durability and longevity. The body is 4x as strong as cast iron. This extra strength means more clamping force for demanding projects. The Forged Steel Vise is lightweight without compromising clamping force.
- 130,000 PSI Tensile Strength Austempered Ductile Iron
- Black Oxide Hardware
- Replaceable Machinist and Pipe Jaws
- Adjustable Guide Rails for Smooth Operation
- 360 Degree Swivel Base
- Three Mounting Holes
- Large Anvil Worksurface
Features and Benefits
Machined Anvil SurfaceAn oversize anvil work surface is featured on the Yost Forged Steel line of vises. This large work surface is machined smooth and designed for metal shaping or bending. Made from forged steel, this anvil work surface is more durable than work surfaces found on traditional cast iron vises. |
Replaceable Machinist and Pipe JawsYost forged steel vises are the only forged steel bench vises supplied with replaceable machinist and pipe jaws. These precision machined jaws provide better gripping surfaces than cast in place jaws. The option to replace these jaws when they are worn down, allows you to only replace parts you need rather than the full vise. |
Precision MachiningThe machined main bar means this vise will operate smoothly and precisely. If the bar of the vise does wear down the two Allen sets in the side of the vise are adjustable. Adjusting these Allen sets will make sure that the vise closes flush each and every time you use the vise. |
|
|
|
|
|
|---|---|---|---|---|
| FSV-4 | FSV-5 | ADI-6 | ADI-8 | |
| Jaw Width | 4" | 5" | 6" | 7" |
| Jaw Opening | 5" | 6" | 7.875" | 9" |
| Pipe Capacity | .5" - 2" | .5" - 3" | .75" - 3.5" | .75" - 4" |
| Throat Depth | 2.9" | 3.25" | 3.7" | 4.84" |
| Weight | 22 | 27 | 42 | 57 |
| Clamping Force | 5,000 lbs. | 6,300 lbs. | 10,000 lbs. | 11,000 lbs. |
| Handle Diameter | .435" | .475" | .5" | .55" |
| Handle Length | 7.125" | 8" | 9" | 9.5" |
| Max Torque | 118 ft/lbs | 149 ft/lbs | 200+ ft/lbs | 200+ ft/lbs |
BEST SELLERS
From the manufacturer
Yost - Since 1908
Yost has been building tools for 100 years. Our staff is always ready to answer any questions you may have.
Yost Forged Steel Vises
Extreme Strength
Made from 130,000 PSI Austempered Ductile Iron, the Yost ADI-8 line of vises is both lightweight and strong . These vises are designed for durability and longevity. The body is 4x as strong as cast iron. This extra strength means more clamping force for demanding projects. The Forged Steel Vise is lightweight without compromising clamping force.
- 130,000 PSI Tensile Strength Austempered Ductile Iron
- Black Oxide Hardware
- Replaceable Machinist and Pipe Jaws
- Adjustable Guide Rails for Smooth Operation
- 360 Degree Swivel Base
- Three Mounting Holes
- Large Anvil Worksurface
Features and Benefits
Machined Anvil SurfaceAn oversize anvil work surface is featured on the Yost Forged Steel line of vises. This large work surface is machined smooth and designed for metal shaping or bending. Made from forged steel, this anvil work surface is more durable than work surfaces found on traditional cast iron vises. |
Replaceable Machinist and Pipe JawsYost forged steel vises are the only forged steel bench vises supplied with replaceable machinist and pipe jaws. These precision machined jaws provide better gripping surfaces than cast in place jaws. The option to replace these jaws when they are worn down, allows you to only replace parts you need rather than the full vise. |
Precision MachiningThe machined main bar means this vise will operate smoothly and precisely. If the bar of the vise does wear down the two Allen sets in the side of the vise are adjustable. Adjusting these Allen sets will make sure that the vise closes flush each and every time you use the vise. |
|
|
|
|
|
|
|---|---|---|---|---|
| FSV-4 | FSV-5 | ADI-6 | ADI-8 | |
| Jaw Width | 4" | 5" | 6" | 7" |
| Jaw Opening | 5" | 6" | 7.875" | 9" |
| Pipe Capacity | .5" - 2" | .5" - 3" | .75" - 3.5" | .75" - 4" |
| Throat Depth | 2.9" | 3.25" | 3.7" | 4.84" |
| Weight | 22 | 27 | 42 | 57 |
| Clamping Force | 5,000 lbs. | 6,300 lbs. | 10,000 lbs. | 11,000 lbs. |
| Handle Diameter | .435" | .475" | .5" | .55" |
| Handle Length | 7.125" | 8" | 9" | 9.5" |
| Max Torque | 118 ft/lbs | 149 ft/lbs | 200+ ft/lbs | 200+ ft/lbs |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
