Design Engineering 010236 ONYX Series Starter Heat Shield, 7" x 2'

Retail Price: $ 65.11

ONYX Series Starter Heat Shield

The ONYX Series Starter Shield combines two technologically advanced textiles into a dual layer for maximum thermal control. The outer layer is made from heat treated glass fiber bonded with molten aluminum then formed into a tight weave for added strength and durability. The inner layer is made of a specially treated, high temperature resistant fabric (89% silica). Combined, these materials protect the starter up to 1350° F of direct heat. The ONYX Series shield has a rich, black finish and is sized 7" width by 24" length. The length can be trimmed to size for added convenience and fastens with a hook and loop fastening system that makes it easy to install without the trouble of removing the starter. Multi-purpose in design and fit, this shield also can be used to wrap most master cylinders, distributors, fuel pumps and many other components.

Provides reliable heat protection for starters under severe duty or extreme heat
Dual layered for maximum thermal control
Protect your starter from up to 1350° F of direct heat
Can be trimmed to size and fastens with a hook and loop system


	Titanium Exhaust Heat Wrap	High-Temperature Silicone Coating Spray	Cool-Tube Extreme Heat Reflective Sleeve	Reflect-A-GOLD	Heat Sheath - Aluminized Sleeving	Fire Sleeve and Tape Kit
	Made from pulverized lava rock and engineered for improved thermal performance and reliability	Recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap	Ultra-lightweight heat reflective solution for wires, cables, hoses, fuel lines, etc.	Heat reflective solution for firewalls, bulkheads, engine covers, floors, seat bottoms & more	Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime	Use for bundling and protecting hoses, electrical wiring, etc. from high temperatures


	Fire Sleeve and Tape Kit	Titanium Pipe Shield	Versa Shield	Titanium Turbo Shield	Protect-A-Boots and Wires Kit	Hi-Temp Shrink Tubing
	Use to cover firewalls, marine engine compartments, RVs, or in the tub of a racecar where typical mechanical fasteners cannot be used	Easy to install with unique rivet-based pipe standoff brackets and pipe clamps	Protect your starters from potential failure caused by under-hood heat soak conditions	Custom fit for easy installation, the incoporated anchoring hooks provide a secure fit	Optimize your under-hood protection against radiant heat while adding a finished look to your spark plug wires	Provides excellent electrical insulation, protection, as well as providing strain relief

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Design Engineering 010236 ONYX Series Starter Heat Shield, 7" x 2'

BEST SELLERS

Product introduction

Shipping Notices

The ONYX Series Starter Shield from DEI, provides reliable heat protection for starters under severe duty or extreme heat. Starters exposed to heat soak often malfunction or have problems starting reliably. DEI's next generation ONYX Series Starter Shield provides the highest level of thermal protection to prevent starter malfunction due to heat soak. The ONYX Series Starter Shield combines two technologically advanced textiles into a dual layer for maximum thermal control. The outer layer is made from heat treated glass fiber bonded with molten aluminum then formed into a tight weave for added strength and durability. The inner layer is made of a specially treated, high temperature resistant fabric (89% silica). Combined, these materials protect the starter up to 1350 degrees Fahrenheit of direct heat. The ONYX Series shield has a rich, black finish and is sized 7" width by 24" length. The length can be trimmed to size for added convenience and fastens with a hook and loop fastening system that makes it easy to install without the trouble of removing the starter. Multi-purpose in design and fit, this shield also can be used to wrap most master cylinders, distributors, fuel pumps and many other components.

From the manufacturer

ONYX Series Starter Heat Shield

Provides reliable heat protection for starters under severe duty or extreme heat
Dual layered for maximum thermal control
Protect your starter from up to 1350° F of direct heat
Can be trimmed to size and fastens with a hook and loop system


	Titanium Exhaust Heat Wrap	High-Temperature Silicone Coating Spray	Cool-Tube Extreme Heat Reflective Sleeve	Reflect-A-GOLD	Heat Sheath - Aluminized Sleeving	Fire Sleeve and Tape Kit
	Made from pulverized lava rock and engineered for improved thermal performance and reliability	Recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap	Ultra-lightweight heat reflective solution for wires, cables, hoses, fuel lines, etc.	Heat reflective solution for firewalls, bulkheads, engine covers, floors, seat bottoms & more	Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime	Use for bundling and protecting hoses, electrical wiring, etc. from high temperatures


	Fire Sleeve and Tape Kit	Titanium Pipe Shield	Versa Shield	Titanium Turbo Shield	Protect-A-Boots and Wires Kit	Hi-Temp Shrink Tubing
	Use to cover firewalls, marine engine compartments, RVs, or in the tub of a racecar where typical mechanical fasteners cannot be used	Easy to install with unique rivet-based pipe standoff brackets and pipe clamps	Protect your starters from potential failure caused by under-hood heat soak conditions	Custom fit for easy installation, the incoporated anchoring hooks provide a secure fit	Optimize your under-hood protection against radiant heat while adding a finished look to your spark plug wires	Provides excellent electrical insulation, protection, as well as providing strain relief

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.