- ❥WELL DESIGNED GIFT PACKAGE: well received 6 colors, with beautiful bottles and GIFT BOX. Candy Lover UV gel nail polish set--IDEAL GIFT for yourself or your Her;
- ❥EASY TO USE: High quality gel polish makes it easier for salon or yourself to achieve a perfect nail art, UV/LED lamp is also required for a manicure. It is recommended to work with same brand base & top coat. Apply 2 or 3 layers to get the full color;
- ❥HEALTHY INGREDIENTS: Made from natural resin with no smell and non-toxic;
- ❥LONG LASTING: A good manicure will accompany you for more than 21 days. No nicks, chips or smudges;
- ❥Your always online CANDY ASSISTANT: Any question or problem? please never hesitate to contact us first by email, and we will definitely provide you a satisfied solution.（we believe the quality of our products, and we have more faith in our service）
**EASY APPLICATION:**
1. Push back the cuticle, trim the edge, polish your nails and make sure they are dry and clean.
2. Apply Base coat thinly, and cure under UV lamp for 1-2 minute, LED light for 30-60s；(It is normal for a base coat keep stick after curing, do not curing the base coat too long)
3. Apply 1st thin coat of polish and cure; (UV lamp for 2 mins, LED lamp for 30-60 secs)
4. Apply 2nd thin coat of polish and cure too; (UV lamp for 2 mins, LED lamp for 30-60 secs)
-- Apply 3rd coat if necessary.
5. Apply Top coat and cure under UV lamp for 2 minute, LED light for 30-60 seconds;
6. Wipe nails with rubbing alcohol to remove residue.
Then your shiny and long lasting nail art finished!
How to keep the LONG LASTING?
1.Nail pre work;( filing and out of oil are the most important)
2.Base coat（same brand will help to stay longer）and it is normal for the base coat to keep a little sticky after curing;
3.Cap the nail edge of each coat;
5.Do not have the polish attached to skin or cuticles;
6.Thin coats really mean a lot to the long-lasting effect.
HOW TO REMOVE:
Step 1: Wear off and rasp away the top coat.(Important)
Step 2: Soak off the nails into gel polish remover wraps pads for about 5 minutes.
Step 3: Use an orange stick or a cuticle pushier to remove softened gel.
Apply some nail cuticle oil if necessary.
Some Normal Questions
Not dry?
Please check the wattage of your lamp. Are you only curing for 30 seconds?
We suggest:
Base coat cured for 30 secs.
Gel polish each coat - 60 secs.
Top coat - 60 secs.
Wipe with alcohol cotton ball.
Too Thick?
Applying every thin coat is the key , make sure the brush don'thave too much on it before starting the strokes.
BEST SELLERS
Product Description
**EASY APPLICATION:**
1. Push back the cuticle, trim the edge, polish your nails and make sure they are dry and clean.
2. Apply Base coat thinly, and cure under UV lamp for 1-2 minute, LED light for 30-60s；(It is normal for a base coat keep stick after curing, do not curing the base coat too long)
3. Apply 1st thin coat of polish and cure; (UV lamp for 2 mins, LED lamp for 30-60 secs)
4. Apply 2nd thin coat of polish and cure too; (UV lamp for 2 mins, LED lamp for 30-60 secs)
-- Apply 3rd coat if necessary.
5. Apply Top coat and cure under UV lamp for 2 minute, LED light for 30-60 seconds;
6. Wipe nails with rubbing alcohol to remove residue.
Then your shiny and long lasting nail art finished!
How to keep the LONG LASTING?
1.Nail pre work;( filing and out of oil are the most important)
2.Base coat（same brand will help to stay longer）and it is normal for the base coat to keep a little sticky after curing;
3.Cap the nail edge of each coat;
5.Do not have the polish attached to skin or cuticles;
6.Thin coats really mean a lot to the long-lasting effect.
HOW TO REMOVE:
Step 1: Wear off and rasp away the top coat.(Important)
Step 2: Soak off the nails into gel polish remover wraps pads for about 5 minutes.
Step 3: Use an orange stick or a cuticle pushier to remove softened gel.
Apply some nail cuticle oil if necessary.
Some Normal Questions
Not dry?
Please check the wattage of your lamp. Are you only curing for 30 seconds?
We suggest:
Base coat cured for 30 secs.
Gel polish each coat - 60 secs.
Top coat - 60 secs.
Wipe with alcohol cotton ball.
Too Thick?
Applying every thin coat is the key , make sure the brush don'thave too much on it before starting the strokes.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
