Cen-Tec Systems 94764 CT25 Central Vacuum Electric Nozzle with Integrated Wand, Black

Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose

Quiet Drive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle

Includes a four position height adjustment is ideal for use on both traditional or high density soft carpets

Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces

A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning

Can be used as a replacement for a Nutone CT600 electric brush

The fully integrated telescopic electric wand connects the CT25 to central vacuum and canister electric hoses with a flush plug position electrical connection.

style:

CT25 with Integrated Wand

Retail Price: $ 186.31

Wholesale Price: Inquire Now


Hose Handle Dimensions The integrated flush wand connects to hose handles with a 3.3 inch nozzle. From the handle base to the locking button should be 2 inches, leave 1.3 inches from the locking button to the end of the metal nozzle.	Flush Connection The word "Flush" refers to the electrical connection to the handle. A two pronged outlet should be 'flush' with the handle, not recessed.	Connected Wand When the wand is fully connected it should fit snugly over the nozzle of the handle. It is recommended to give a firm tug, attempting to pull them apart to ensure that the connection is secure.


Cylindrical Wand The integrated wand is a cylinder and will only work with hose handles and vacuum nozzles that have cylindrical connections.	PT (Pig Tail) Valve For PT valves the hose should have a cord that will need to be plugged into a standard wall outlet. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC (Direct Connect) Valve For DC valves the hose end plugs directly into the inlet valve at the bottom to power the vacuum nozzle. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC Plug in In the case of DC inlet valves, the direction the hose end is turned is important. Be sure to line up the electrical prongs to the outlet on the bottom to ensure an electrical current is established to your vacuum.

Cen-Tec Systems is a family owned business of 30 years specializing in the manufacturing and distribution of domestic and commercial vacuum accessories and related specialty vacuum systems.

Cen-Tec Systems focuses on delivering complete solutions to challenging applications solved with innovative products, extensive options, and superior customer support. With over 100 years of combined experience Cen-Tec Systems can provide technical assistance as necessary to achieve our customers' objectives.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Cen-Tec Systems 94764 CT25 Central Vacuum Electric Nozzle with Integrated Wand, Black

BEST SELLERS

Product introduction

Shipping Notices

Cen-Tec Systems is pleased to introduce the new response II CT25 power nozzle, which combines features typical of premium power nozzles with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density soft carpets. Power nozzles on traditional carpets permit the air to flow under the agitator, traveling up and back carrying the dirt into the air stream. The new high density soft carpets prevent the air to enter through this traditional means. The challenge was to develop a solution which adjusts to meet carpet conditions while still keeping the air stream entering under the agitator for an effective clean. Other systems vent, but much of the air is wasted traveling over the agitator not under where it is most effective in carrying away dirt. The CT25 allows a self adjusting air relief entering through vents in the hood of the nozzle. The result is no wasted air flow, effective cleaning and a self regulating system that works as well on traditional carpets as it does on the new high density ultra soft carpets. Also includes a flush mount integrated wand.

From the manufacturer


Hose Handle Dimensions The integrated flush wand connects to hose handles with a 3.3 inch nozzle. From the handle base to the locking button should be 2 inches, leave 1.3 inches from the locking button to the end of the metal nozzle.	Flush Connection The word "Flush" refers to the electrical connection to the handle. A two pronged outlet should be 'flush' with the handle, not recessed.	Connected Wand When the wand is fully connected it should fit snugly over the nozzle of the handle. It is recommended to give a firm tug, attempting to pull them apart to ensure that the connection is secure.


Cylindrical Wand The integrated wand is a cylinder and will only work with hose handles and vacuum nozzles that have cylindrical connections.	PT (Pig Tail) Valve For PT valves the hose should have a cord that will need to be plugged into a standard wall outlet. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC (Direct Connect) Valve For DC valves the hose end plugs directly into the inlet valve at the bottom to power the vacuum nozzle. An electrical connection to the central vacuum is obtained by plugging in the hose end where the metal band touches both prongs located at the top inside of the inlet valve.	DC Plug in In the case of DC inlet valves, the direction the hose end is turned is important. Be sure to line up the electrical prongs to the outlet on the bottom to ensure an electrical current is established to your vacuum.

Cen-Tec Systems is a family owned business of 30 years specializing in the manufacturing and distribution of domestic and commercial vacuum accessories and related specialty vacuum systems.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.