Description:
KOWOOD Lock Miter Router Bit provide a strong mechanical locking action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps to strengthen the joint over a basic rabbet or butt joint.
Specification:Cutting Edge Material: Kowood High Grade Carbide
Color: Yellow
Shank Dia.: 1/2” (12.7mm)
Cutting Thickness: 3/4” (19.05mm)
Package included:1x 45゚Lock Miter Bit
Safety instructions:
Always wear eye protection
Always using safety cover provided by benchtop router table
Do not wear gloves to avoid hazard of getting caught in the tool and pulling your hand in to get mangled during bit spinning
Examine the bits before use for cracks or chips. Do not use damaged or bull bits
Make sure bits are properly secured in collect and reach the indicator mark (“K” Mark)
This product is designed for portable or benchtop router machines. Please do not use in another machine (etc. Driller)
Max. Rpm in 18000
Note:
Use double-faced tape to fasten the scrap pieces to all of the ends of the workpieces at once. Make them about an inch longer at each end for good stability.