QTlier iPhone 6s Screen Replacement 4.7" Black,LCD Display & Touch Screen Digitizer with 3D Touch Full Assembly Set for iPhone 6s 4.7 inch with Repair Tool kit

✔️Compatible：ONLY for iPhone 6S(A1633/A1688/A1700), Not for iPhone 6.

✔️Application：Replace the screens that are cracked, broken, dead pixel, damaged, touch is not working, touch response issues, non-functioned screen.

✔️Notes：The home button, earpiece speaker, front camera, sensor flex and LCD shield plate are not included in the iPhone 6s screen replacement . It must transfer them from the old screen to the new.

✔️ Quality：All screens 100% Inspected by professional QC team before shipping and working perfectly,more wearable.

✔️After-sales service: Please don't worry about the difficulty of replacing the iPhone 6s screen.If you have any questions, please contact us any time.

color:

Black

Retail Price: $ 23.99

Wholesale Price: Inquire Now

Purchase Notes:

a) Only for iPhone 6s(A1633/A1688/A1700)

b) It never come with HOME BUTTION, fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.

c) To replace the faulty & defect LCD Display Touch Screen Digitizer Assembly. Such as the screen dose not respond properly, display problems, distortion pixels, cracked LCD screens, wrong color issues and old & dead LCD.

FAQ: 1.After install ,the screen came out black or unresponsive,what should I do ?

Could you please check and do it as below? a.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.

b.Disconnect and reconnect the flex cables from the motherboard side.

c.Then Reboot: Hold buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again.

FAQ: 2.Why the touch ID cannot work ?

Please transfer the home bottom from your orginal screen,Because only the orginal screen can make your touch ID work . This item is not include home bottom

1. Make sure your phone is powered off first before installation.
Mark each screw.You might break your screen if put the screw in a wrong hole.
Please transfer your original home bottom, only it can make your touch ID work.
Please check if the screen have crack, scratches or something omission when sign for the parcel.


Anti Fingerprint, water and oil Fingerprint-resistant oleophobic coating. Anti fingerprint, water and oil.	High Resolution Equipped with this iPhone screen, you can find a clearer and more colorful world on the screen and enjoy the original visual experience.	Hard Tempered Glass Made from hard tempered glass. Do not need to worry about scratches or hammers.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

QTlier iPhone 6s Screen Replacement 4.7" Black,LCD Display & Touch Screen Digitizer with 3D Touch Full Assembly Set for iPhone 6s 4.7 inch with Repair Tool kit

BEST SELLERS

Product introduction

Shipping Notices

Color: Black 1. ONLY fits for iphone 6s. 2. Tested one by one before shipping, 100% working, good quality replacement with 3D touch for your broken or non-functioned screen. 3. Professional installation is highly recommended, or you can install it by watching videos on YouTube. 4. Install it again if it is not working. If it still doesn't work, contact me please. Attention Please Refer to the installation tutorial on Youtube (Related Video Shorts) Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again. Confirm the phone is power off before installation. Do not press the left and upper corners of the screen, otherwise may cause lines on the screen. Each screw should be installed into original location, because they are not same length! Never tighten screw over limit! Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage! If you meet with these issues Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc. Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.

Product Description

Purchase Notes:

a) Only for iPhone 6s(A1633/A1688/A1700)

b) It never come with HOME BUTTION, fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.

FAQ: 1.After install ,the screen came out black or unresponsive,what should I do ?

Could you please check and do it as below? a.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.

b.Disconnect and reconnect the flex cables from the motherboard side.

c.Then Reboot: Hold buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again.

FAQ: 2.Why the touch ID cannot work ?

Please transfer the home bottom from your orginal screen,Because only the orginal screen can make your touch ID work . This item is not include home bottom

1. Make sure your phone is powered off first before installation.
Mark each screw.You might break your screen if put the screw in a wrong hole.
Please transfer your original home bottom, only it can make your touch ID work.
Please check if the screen have crack, scratches or something omission when sign for the parcel.


Anti Fingerprint, water and oil Fingerprint-resistant oleophobic coating. Anti fingerprint, water and oil.	High Resolution Equipped with this iPhone screen, you can find a clearer and more colorful world on the screen and enjoy the original visual experience.	Hard Tempered Glass Made from hard tempered glass. Do not need to worry about scratches or hammers.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.