AUTOSAVER88 Headlight Assembly Compatible with 2005-2011 Toyota Tacoma Pickup Truck Headlight Assembly OE Style Replacement Black Housing Amber Reflector

Style - In addition to keeping you safe at night, our headlights’ stylish design keeps you looking good on the road!

Tougher-Than-Nails Construction- Heavy-duty housings are made of superior OEM Grade ABS plastic to ensure exceptional resistance to weather and impact that guarantees durability for years ahead.

Plug-n-Play Installation- As a fully compatible replacement for factory parts, our bolt-on style headlights are designed for quick and easy installation,requiring no modification or drilling.

Guaranteed Quality- Our headlights are thoroughly tested to deliver smooth operation as well as for impact and heat resistance and endurance against rough road conditions over a long period of time. The units are completely sealed to prevent moisture from being trapped inside the housing.

Product Compliance- AUTOSAVER88 strictly adheres to DOT & SAE safety standards which all OE light manufacturers must abide by.

Retail Price: $ 119.99

Wholesale Price: Inquire Now

Headlight Assemblies OE Style Headlight Replacement, Direct Fit for 05-11 Toyota Tacoma, Chromed Housing

If your headlights aren’t as bright as they used to be, it may be time to replace them!

Specification and Application

Features:

Tested in simulated rain/humidity/shock
High quality aftermarket replacement headlights
Professional installation is highly recommended
All lamps come without bulbs, should reuse original factory bulbs

Compatible Models:

2005 - 2011 TOYOTA TACOMA
HOLLANDER:114-59473AL,114-59472AR
PARTSLINK:TO2502181,TO2503181

Installation Recommendations

Undo the screws, clips, or retainer springs that hold the headlight in place.
Disconnect the wiring from the assembly.
Detach the headlight from the vehicle to replace it with a new one.
Fit in the new headlight assembly.
Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
Reconnect the wiring that was unplugged from the assembly.
Put back the grille and other components that you removed. Seal them back into place.
Test the new assembly.

How to Adjust Your Headlights?

Find the adjustment screws on your vehicle, which sit on the top and side of the light housing. Adjust the headlights one at a time.
You can raise or lower the headlamps by turning the screw on the top of each light clockwise and anticlockwise, respectively. Keep turning the screw until the brightest part of the light beam falls directly on or just below the tape line center on the wall.
Turn the screw on the side to adjust headlights to left or right.

Take a test drive to find out if the headlights have been aimed properly. You can repeat the process until you adjust them to the right position.

Enhance Vehicle Appearance

Create a unique appearance and help increase the resale value of the vehicle.

Dustproof and Waterproof

Waterproof and dustproof rate is IP65.

See farther. See wider, See better

A new pair of headlights from AUTOSAVER88 allows you to see father down the road during the night and in any bad weather that may arise.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

AUTOSAVER88 Headlight Assembly Compatible with 2005-2011 Toyota Tacoma Pickup Truck Headlight Assembly OE Style Replacement Black Housing Amber Reflector

BEST SELLERS

Product introduction

Shipping Notices

Product Description:
05-11 Toyota Tacoma Driver and Passenger Headlights

A Headlight (headlamp) is a lamp attached to the front of a vehicle to light the road ahead. Headlight performance has steadily improved throughout the automobile age, spurred by the great disparity between daytime and nighttime traffic fatalities.
AUTOSAVER88 headlights offer high quality OE style replacement headlights. You can find our large selection of OE-replacement headlights by AUTOSAVER88.

Features:
Tested In Simulated Rain/Humidity/Shock
High quality aftermarket replacement headlights
Professional installation is highly recommended
All Lamps come without bulbs, Should be re-use original factory bulbs

Compatible Models:
2005 - 2011 TOYOTA TACOMA
HOLLANDER:114-59473AL,114-59472AR
PARTSLINK:TO2502181,TO2503181

How do I replace headlights?
How to replace headlights can vary from car to car, but a typical headlight repair may include the following steps:
Open the hood.
Remove any other parts that keep you from accessing the headlight housing bolts.
These may include air intake parts or radiator hoses, for example.
Remove the screws or bolts holding the headlight housing in place.
Disconnect the wiring harnesses from the headlight bulbs.
Pull the headlight off of the vehicle.
Put the new headlight into place on the vehicle.
Connect the wiring harnesses to the headlight bulbs.
Fasten the bolts or screws to the headlight housing.
Aim the headlights to be properly aligned.
You may need a service manual to learn the process for aiming your car's headlights. Replacing one headlight at a time may make aiming the headlight easier. Close the hood.

Product Description

Headlight Assemblies OE Style Headlight Replacement, Direct Fit for 05-11 Toyota Tacoma, Chromed Housing

If your headlights aren’t as bright as they used to be, it may be time to replace them!

Specification and Application

Features:

Tested in simulated rain/humidity/shock
High quality aftermarket replacement headlights
Professional installation is highly recommended
All lamps come without bulbs, should reuse original factory bulbs

Compatible Models:

2005 - 2011 TOYOTA TACOMA
HOLLANDER:114-59473AL,114-59472AR
PARTSLINK:TO2502181,TO2503181

Installation Recommendations

Undo the screws, clips, or retainer springs that hold the headlight in place.
Disconnect the wiring from the assembly.
Detach the headlight from the vehicle to replace it with a new one.
Fit in the new headlight assembly.
Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
Reconnect the wiring that was unplugged from the assembly.
Put back the grille and other components that you removed. Seal them back into place.
Test the new assembly.

How to Adjust Your Headlights?

Find the adjustment screws on your vehicle, which sit on the top and side of the light housing. Adjust the headlights one at a time.
You can raise or lower the headlamps by turning the screw on the top of each light clockwise and anticlockwise, respectively. Keep turning the screw until the brightest part of the light beam falls directly on or just below the tape line center on the wall.
Turn the screw on the side to adjust headlights to left or right.

Take a test drive to find out if the headlights have been aimed properly. You can repeat the process until you adjust them to the right position.

Enhance Vehicle Appearance

Create a unique appearance and help increase the resale value of the vehicle.

Dustproof and Waterproof

Waterproof and dustproof rate is IP65.

See farther. See wider, See better

A new pair of headlights from AUTOSAVER88 allows you to see father down the road during the night and in any bad weather that may arise.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.