Stainless Works Stainless Steel Spigot is designed to replace the cheap, easy to break and leaky plastic spigot on the market. Our spigots look elegant, feel solid, and last a lifetime
- SOLID 304 STAINLESS STEEL CONSTRUCTION: No Lead, Acid Resistant. Great for Dispensing Tea, Beverage, Vinegar or Wine.
- BEST FLOW RATE: Quarter-Turn Stainless Ball Valve, 4 Seconds Per Cup. First Picture in Open Position, Turn Right to Close.
- UNIVERSAL FIT: Needs 5/8 inch or 16mm diameter opening to install. For flat surface, can fit up to 1 inch opening.
Stainless Works SSS010 Use and Care Instruction:
Before installation, wash in soapy water and rinse suggested
Remove the nut, and one set of washer, gasket from the spigot
Insert the spigot to the despenser
Install the gasket and washer
Tight the nut. Usually hand-tight is good enough to create a water tight seal. You can also use 3/4 in wrench. Do not over-tighten, it could crack the despenser made of fragile material like glass or ceramic.
After each use, rinse thoroughly with clean water with handle in partial open position(45 degree turn)
If used for sugary drink, we suggest that remove spigot from the dispenser and clean thoroughly.
Package Content: 1 Stainless Works stainless steel spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless Steel nut.