A: When the battery voltage is too low, the controller will stop to output(≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V, 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V.
Q: What battery type is this controller supported?
A: (1)B-01=LEAD-ACID, 12V; B-02=LITHIUM ION 3s, 3*3.7V=11.1V; B03=LIFePO4 4s, 4*3.2V=12.8V. (B01 is the default type, If you would like to to switch to another 2 types, please select it manually.)
Note:
<1> Wire Range: 26-12 AWG
<2> Make sure the voltage of your battery reach 11V for initial use , so as to start up for the controller to registered the battery type accordingly.
<3> Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
<4> Indoor use only: the working temperature of this controller is -35°C to +60°C. During hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation
Features:
(1) Automatically manage the working of solar panel and battery in solar system.
A: When the battery voltage is too low, the controller will stop to output(≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V, 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V.
Q: What battery type is this controller supported?
A: (1)B-01=LEAD-ACID, 12V; B-02=LITHIUM ION 3s, 3*3.7V=11.1V; B03=LIFePO4 4s, 4*3.2V=12.8V. (B01 is the default type, If you would like to to switch to another 2 types, please select it manually.)
Note:
<1> Wire Range: 26-12 AWG
<2> Make sure the voltage of your battery reach 11V for initial use , so as to start up for the controller to registered the battery type accordingly.
<3> Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
<4> Indoor use only: the working temperature of this controller is -35°C to +60°C. During hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation
Features:
(1) Automatically manage the working of solar panel and battery in solar system.
(5) Prolong the battery life cycle and keep the load work well.
(6) Easy to set up and operate.
(7) Suitable for small solar energy system.
Specification:
*Voltage: DC 12V/24V
*Self-consuming: 10MA
*Rated Charge Current: 20A
*Rated Load Current: 20A
*Over charge Protection: 14.4V/28.8V
*Over charge Floating charge: 13.7V/27.4V
*Charge recover voltage: 12.6V/25.2V
*Over discharge Protection: 10.7V/21.4V
*Over discharge Recover: 12.6V/25.2V
*USB output: 5V/3A
*Operating temperature: -35℃-60℃
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.