Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included

Retail Price: $ 119.9

Wholesale Price: Inquire Now

Zircon, metalliscanner, Metal Scan, concrete, lath and plaster, mapping the grid, rebar

View larger

Zircon MetalliScanner MT 6

The MetalliScanner MT 6 locates both ferrous (magnetic) and non-ferrous (non-magnetic) metal up to 6 inches (15.2 centimeters) deep in concrete and other non-metallic surfaces. This tool also differentiates between ferrous and non-ferrous metal targets and indicates the target depth in inches and centimeters.

Use the MetalliScanner MT 6:

- Identify the location of metal objects to the nearest inch and depth to the nearest 1/2 inch (13 millimeters) with the easy-to-read LCD screen.

- Find and avoid rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.

- Automatically differentiate between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).

- Show the depth of metal from the surface in both inches and centimeters.

- Help map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.

View larger	View larger	View larger
Scan up to 6 Inches Deep This powerful dedicated metal scanning tool locates ferrous and non-ferrous metal up to 6 inches (152 millimeters) deep in concrete and other non-metallic surfaces. The easy-to-read oversized display screen identifies both target location and depth, showing you when you are moving towards or away from a target.	Scan through Lath and Plaster Find studs in lath and plaster walls before drilling. This powerful tool saves time and money by eliminating guesswork, rework, needless holes, and costly broken drill bits or saw blades. It is able to locate even little brad tacks used to fasten every piece of lathe to the stud.	Map the Grid The MT 6 helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble. This tool is ideal for checking concrete slabs for metal before sawing or drilling and is recommended for locating reinforcing rebar in masonry.	Key to Success is the Battery A new, fully charged 9V battery is required to steadily power the integrated LCD screen in Zircon tools. Please note that, like a cell phone or any personal electronic device, the 9V batteries needed to power Zircon tools can lose power even when sitting idle. The installation of a fresh battery, with an extended expiration date, typically resolves 99% of problems seen by Zircon Customer Support.


	MultiScanner i520	MultiScanner x85	MultiScanner 740	MetalliScanner m40	MetalliScanner MT 6
Finds Edges of Studs	✓	✓	✓	✓
Finds Center of Studs	✓	✓	✓	✓
Metal Scan Mode for Ferrous & Non- Ferrous Metal	✓		✓	✓	✓
AC Scan Mode for Tracing/ Tracking Live Unshielded Wires Behind Walls	✓	✓	✓
WireWarning Detection System in Stud Scan and Metal Scan Modes	✓		✓
ACT (Auto Correcting Technology) Auto Calibrates Tool	✓	✓	✓
Thermal Detection Mode		✓
Detect Difference Between Ferrous and Non-Ferrous Metal					✓
Integrated Marking System			✓

Frequently Asked Questions

Question: How deep can the MT 6 scan?

Answer: The MT 6 scans up to 6 in (15 cm) deep.

Question: What types of metal does the MT 6 detect?

Answer: The MT 6 detects both Ferrous (magnetic) and Non-Ferrous (non-magnetic) Metals.

Question: What information does the MT 6 display screen provide?

Answer: The MT 6's Display Screen shows both the type of metal being detected as well as the metal's depth.

Question: Can I use the MT 6 to detect rebar in concrete?

Answer: Yes you can! The MT 6 detects metal up to 6 in (13 cm) deep.

Question: Does the MT 6 find wall studs too?

Answer: Yes! The MT 6 is a dedicated metal scanner. It finds nail and/or screw heads that hold wall board to studs (thus identifying stud locations) up to 6 in (13 cm) below the surface.

Question: What type of battery does the MT 6 use?

Answer: A new 9V alkaline battery is required.

Question: Where can I get help using my MetalliScanner?

Answer: Technical Support is available Toll Free on our Customer Support Number 8:00am – 5:00pm Mon – Fri PST or on the Zircon Website.

Zircon, metalliscanner, MT6, Metal Scan, concrete, mapping the grid, lathe and plaster, rebar

Why Zircon?

For over 30 years, the dedicated engineers and staff at Zircon have developed and implemented patented, cutting-edge, technology for our professional and DIY lines of wall scanners and stud-finding tools. As the worldwide industry leader in the category, we take the quality of our products and our customer service seriously. Every unit coming off our production lines is calibrated and quality-tested before going to market. Because we know there's a learning curve to our technology, we back our products with a world-class customer service and tech support team.

You can call our customer support number and speak to a live expert who will be happy to answer any questions or help you work through any issues you may be experiencing with our tools. We've also published many tool and project specific videos online, in case you have questions during our off hours. Armed with our quality products and backed by our support teams, you'll know the professional confidence that comes from owning a Zircon.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Zircon MetalliScanner MT6-Professional Metal Detector Map the Grid and Use on Concrete, Drywall, Lathe and Plaster, Stucco, and More - Protective Case and Battery Included

BEST SELLERS

Product introduction

Shipping Notices

The Zircon MetalliScanner MT 6 electronic metal scanner locates and differentiates between ferrous metal (such as rebar) and non-ferrous metal (such as copper pipe) up to 6 inches (150 mm) deep in solid concrete and other non-metallic surfaces. Use the Zircon MT 6 to locate embedded metal before your drill bit or saw blade does. Find or avoid rebar, cables, pipe, hidden nails in reclaimed lumber, nails/tacks in studs behind lath & plaster walls, electrical boxes, conduit and more. This metal locator can act as a rebar detector to help map out the grid of metal through any nonmetallic construction material, including concrete, tile, stucco, paneling, drywall, plaster, and marble. This powerful metal detector also indicates the target depth in inches and centimeters. When the plus becomes a minus (-), you have crossed over the target and are now moving away. The Zircon MT6 comes complete with a protective aluminum case and a 9V battery. To get started, install the 9V battery and turn on the unit away from the surface being scanned. Note that the tool performs a calibration as soon as it is powered on. It is best to âpre-scanâ the area first to get a general since of what will be detected. Place the unit on the scanning surface and move from side to side. The easy to read LCD screen indicates when you are approaching a metal object with a large plus (+) sign on the display. Then press the âPress to Recalibrateâ button and repeat the procedure noting the depths of the items being detected. The MT 6 is now delivered to you in our Amazon exclusive easy to open packaging. Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the Zircon MT 6 has the technology and durability you're looking for to get the job done right.

From the manufacturer

View larger

Zircon MetalliScanner MT 6

Use the MetalliScanner MT 6:

- Identify the location of metal objects to the nearest inch and depth to the nearest 1/2 inch (13 millimeters) with the easy-to-read LCD screen.

- Find and avoid rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.

- Automatically differentiate between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).

- Show the depth of metal from the surface in both inches and centimeters.

- Help map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.

View larger	View larger	View larger
Scan up to 6 Inches Deep This powerful dedicated metal scanning tool locates ferrous and non-ferrous metal up to 6 inches (152 millimeters) deep in concrete and other non-metallic surfaces. The easy-to-read oversized display screen identifies both target location and depth, showing you when you are moving towards or away from a target.	Scan through Lath and Plaster Find studs in lath and plaster walls before drilling. This powerful tool saves time and money by eliminating guesswork, rework, needless holes, and costly broken drill bits or saw blades. It is able to locate even little brad tacks used to fasten every piece of lathe to the stud.	Map the Grid The MT 6 helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble. This tool is ideal for checking concrete slabs for metal before sawing or drilling and is recommended for locating reinforcing rebar in masonry.	Key to Success is the Battery A new, fully charged 9V battery is required to steadily power the integrated LCD screen in Zircon tools. Please note that, like a cell phone or any personal electronic device, the 9V batteries needed to power Zircon tools can lose power even when sitting idle. The installation of a fresh battery, with an extended expiration date, typically resolves 99% of problems seen by Zircon Customer Support.


	MultiScanner i520	MultiScanner x85	MultiScanner 740	MetalliScanner m40	MetalliScanner MT 6
Finds Edges of Studs	✓	✓	✓	✓
Finds Center of Studs	✓	✓	✓	✓
Metal Scan Mode for Ferrous & Non- Ferrous Metal	✓		✓	✓	✓
AC Scan Mode for Tracing/ Tracking Live Unshielded Wires Behind Walls	✓	✓	✓
WireWarning Detection System in Stud Scan and Metal Scan Modes	✓		✓
ACT (Auto Correcting Technology) Auto Calibrates Tool	✓	✓	✓
Thermal Detection Mode		✓
Detect Difference Between Ferrous and Non-Ferrous Metal					✓
Integrated Marking System			✓

Frequently Asked Questions

Question: How deep can the MT 6 scan?

Answer: The MT 6 scans up to 6 in (15 cm) deep.

Question: What types of metal does the MT 6 detect?

Answer: The MT 6 detects both Ferrous (magnetic) and Non-Ferrous (non-magnetic) Metals.

Question: What information does the MT 6 display screen provide?

Answer: The MT 6's Display Screen shows both the type of metal being detected as well as the metal's depth.

Question: Can I use the MT 6 to detect rebar in concrete?

Answer: Yes you can! The MT 6 detects metal up to 6 in (13 cm) deep.

Question: Does the MT 6 find wall studs too?

Answer: Yes! The MT 6 is a dedicated metal scanner. It finds nail and/or screw heads that hold wall board to studs (thus identifying stud locations) up to 6 in (13 cm) below the surface.

Question: What type of battery does the MT 6 use?

Answer: A new 9V alkaline battery is required.

Question: Where can I get help using my MetalliScanner?

Answer: Technical Support is available Toll Free on our Customer Support Number 8:00am – 5:00pm Mon – Fri PST or on the Zircon Website.

Why Zircon?

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.