A8 HUD Head up Display Speedometer for Car with OBDII EUOBD ,5.5 inch Universal Digital Speedometer,Over Speed Alarm, KMH/MPH, Windshield Projector with Film

5.5”,5 colour display,Multi colour design makes the screen easier to read highlight important details for quick viewing

The use of nanotechnology to eliminate unwanted reflections making the information easier to read,Automatic and manual brightness adjustment mode

Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile

Wide Compatibility: Suitable for the most of cars with OBD2 and EUOBD standard, plug and play.If you are not sure that your car model is suitable for this product,Please contact us!

Compatibility Attention: OBD2 devices are not compatible with: 1. European / American cars manufacture before 2004 and Asian cars manufactured before 2008. 2. American cars manufacture Dodge, jeep,Chrysler, Chevrolet and all cars before 2004; 3. France cars manufacture FAT,DS, PEUGEOT, Citroen, Renault ，Simca and so on. 4. Japanese cars manufacture SUZUKI, Subaru、MAZDA（ MAZDA 6）, Infiniti （QX50 q50 q501)（is250，ex250，ES300H）（HIACE、RAV4 ）（jazz、CRV）and all cars before 2008.

size:

HUDA8

Retail Price: $ 47.99

Wholesale Price: Inquire Now

HUD main features

1.Plug and Play connectivity with any OBDII or EUOBD capable vehicle;

2.5.5”, 5 colour display;

3.Multi colour design makes the screen easier to read highlight important details for quick viewing;

4.The use of nanotechnology to eliminate unwanted reflections making the information easier to read;

5.Driving mileage and consumption

6.Ability to display a huge range of car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, ability to change units e.g. Kilometre/mile

7.Auto power on and off with the vehicle

8.Automatic and manual brightness adjustment mode

Note:

Inaccurate speed

Solution: Open the HUD, press and hold the waveform button vertically for 5 seconds to enter the menu. The menu displays 0. The default value is 107. adjust setting buttons change the value until the HUD displays the same data as the dashboard. Press and hold the button vertically for 5 seconds to save.

How to switch speed units

Solution: Turn on the HUD, press and hold the setting button vertically for 5 seconds to enter the menu. The menu displays 0, short press 10 times, the default value is 1 for KM, adjust setting buttons change the value, 2 is MPH, then Press and hold the waveform button vertically for 5 seconds to save.

High-performance processing chip, superior performance and compatibility, dual running memory and dual-core processor to ensure high-speed operation of the smooth.

Automatic and manual brightness adjustment mode,Nanotechnology to eliminate unwanted reflections making the information easier to read

Package Includes:

1 x HUD

1 x OBD Cable

1 x Non-slip Mat

1 x Reflective Film

1 x User Manual


Ensure your vehicle is OBDII compatible or EUOBD. a.Check around the area under the steering wheel for an OBD plug b.Contact your vehicle manufacturer or search online c.Open the bonnet and look for a OBDII compatible sticker. When the HUD is connected to the car, please do not start the engine. Turn your car on but do not start the engine. Have the HUD turned off. Press the downside key for 5 seconds and you will hear a ‘tick’ sound, which means that the HUD is back to factory settings.	How To Installation: Several car brand or model with cover in OBD infterface,it may not close the cover after connect the HUD plug.For this,you can push the snap of OBD interface in. Then you can connect the HUD plug inside and you can close the cover now,fixed the interfaces in certain position. 1.Find the car's 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket. 2.Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle. 3.The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.	FAQ： No Screen Display,No Electricity. Reason:Start the car engine;check if the OBD line connection is tight;pls try more times;check if HUD switches on. If no display still,suggest change another car to test Start the car engine, but the screen only shows the car voltage, automatic turn off after 30 seconds. Reason:OBD2 system HUD does NOT work for DODGE,Jeep,Mazda,Suzuki,France car(Peugeot,CitroenRenaultBugatti,DS,Dacia）Italy cars（Lamborghini,Fiat,Maserati,Alfa Romeo,Ferrari,Pagani ,Faralli Mazzanti）some KIA and Hyundai,all American made before 2004 year, all Japanese cars made before 2007 year.OBD I and J-OBD Car not be supported.	Read not clearly under sunlight,has double image. Check whether the protect film has been torn or not on HUD,and then stick the reflection film on the front windshield which in gift box. Vertically long press wave button for 5 seconds enter into Menu, short press 8 times until menu display shows 8, downside 2 times to second parameter setting,then vertically press for 5 seconds to save it. Inaccurate speed. Switch on HUD,vertically long press the wave button for 5 seconds enter into Menu, menu shows 0, the default value is 107, and up or down the wave button to increase or decrease the value, until HUD shows the same with dashboard datas,vertically long press the wave button for 5s to save and exist. How to switch speed unit. Switch on HUD,vertically long press the setting button for 5 seconds enter into Menu, menu shows 0, short press in 10 times, default value 1 is KM, up or down the setting button change value ,2 is MPH ,then long press in setting button for 5 seconds to preserve

With leather,luxur without losing feel！

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

A8 HUD Head up Display Speedometer for Car with OBDII EUOBD ,5.5 inch Universal Digital Speedometer,Over Speed Alarm, KMH/MPH, Windshield Projector with Film

BEST SELLERS

Product introduction

Shipping Notices

Feature:
1.Plug-and-play for OBDII protocol cars
2.Engine speed alarm reminder,facilitating timely shift and saving fuel consumption.
3.Overspeed single-stage and four-stage alarm modes for choose, more conductive to safety driving.
4.5.5" large screen and high-definition display.
5.New function: driving mileage measurement.
6.Display rich content: speed, engine speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, mileage measurement, shift reminding, fatigue driving reminding, low voltage alarm, high temperature alarm, speed alarm, engine fault alarm, fault code elimination, free switching between kilometer and mile.
7.Auto power on and off with vehicle started and shutdown, effective protection of the car battery; while retaining the manual switch mode, and more beneficial to control HUD.
8.Automatic and manual brightness adjustment mode, driving without glare.

HUD Specifications:
Working Temperature: -40c-+80c
Atmospheric pressure: 86-106KPa
Work voltage:9V~16Vdc(12Vdc/400mA)
Size of product:12.5*7.5*1.5(cm)
Weight of product:110g

Package Includes:
1 x HUD
1 x Cable
1 x Non-slip Mat
1 x Reflective Film
1 x User Manual

Note: OBD system HUD does NOT work for DODGE, Jeep, Mazda, Suzuki, All France and Italy cars, some KIA and Hyundai, pickup; all American made before 2004 year, Japanese and Korean cars made before 2008 year.

Product Description

HUD main features

1.Plug and Play connectivity with any OBDII or EUOBD capable vehicle;

2.5.5”, 5 colour display;

3.Multi colour design makes the screen easier to read highlight important details for quick viewing;

4.The use of nanotechnology to eliminate unwanted reflections making the information easier to read;

5.Driving mileage and consumption

7.Auto power on and off with the vehicle

8.Automatic and manual brightness adjustment mode

Note:

Inaccurate speed

How to switch speed units

High-performance processing chip, superior performance and compatibility, dual running memory and dual-core processor to ensure high-speed operation of the smooth.

Automatic and manual brightness adjustment mode,Nanotechnology to eliminate unwanted reflections making the information easier to read

Package Includes:

1 x HUD

1 x OBD Cable

1 x Non-slip Mat

1 x Reflective Film

1 x User Manual


Ensure your vehicle is OBDII compatible or EUOBD. a.Check around the area under the steering wheel for an OBD plug b.Contact your vehicle manufacturer or search online c.Open the bonnet and look for a OBDII compatible sticker. When the HUD is connected to the car, please do not start the engine. Turn your car on but do not start the engine. Have the HUD turned off. Press the downside key for 5 seconds and you will hear a ‘tick’ sound, which means that the HUD is back to factory settings.	How To Installation: Several car brand or model with cover in OBD infterface,it may not close the cover after connect the HUD plug.For this,you can push the snap of OBD interface in. Then you can connect the HUD plug inside and you can close the cover now,fixed the interfaces in certain position. 1.Find the car's 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket. 2.Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle. 3.The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.	FAQ： No Screen Display,No Electricity. Reason:Start the car engine;check if the OBD line connection is tight;pls try more times;check if HUD switches on. If no display still,suggest change another car to test Start the car engine, but the screen only shows the car voltage, automatic turn off after 30 seconds. Reason:OBD2 system HUD does NOT work for DODGE,Jeep,Mazda,Suzuki,France car(Peugeot,CitroenRenaultBugatti,DS,Dacia）Italy cars（Lamborghini,Fiat,Maserati,Alfa Romeo,Ferrari,Pagani ,Faralli Mazzanti）some KIA and Hyundai,all American made before 2004 year, all Japanese cars made before 2007 year.OBD I and J-OBD Car not be supported.	Read not clearly under sunlight,has double image. Check whether the protect film has been torn or not on HUD,and then stick the reflection film on the front windshield which in gift box. Vertically long press wave button for 5 seconds enter into Menu, short press 8 times until menu display shows 8, downside 2 times to second parameter setting,then vertically press for 5 seconds to save it. Inaccurate speed. Switch on HUD,vertically long press the wave button for 5 seconds enter into Menu, menu shows 0, the default value is 107, and up or down the wave button to increase or decrease the value, until HUD shows the same with dashboard datas,vertically long press the wave button for 5s to save and exist. How to switch speed unit. Switch on HUD,vertically long press the setting button for 5 seconds enter into Menu, menu shows 0, short press in 10 times, default value 1 is KM, up or down the setting button change value ,2 is MPH ,then long press in setting button for 5 seconds to preserve

With leather,luxur without losing feel！

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.