MEGAWARE ScuffBuster Boat Bow Guard Standard Notched - Stainless Steel

Protects your boat from scuffs and abrasion caused by trailer rollers

Anti-corrosive 22-gauge 304 stainles steel construction

Bends to conform to your hull

Mirror polished finish

DIY easy application

Retail Price: $ 20.03

Wholesale Price: Inquire Now

Protect your boat's gelcoat from roller and trailer scuffs with the Megaware ScuffBuster Bow Guard. The ScuffBuster easily bends to conform to your boat's hull and attaches using 3M pressure-sensitive adhesives. This simple to install product is made from anti-corrosive, 22-gauge 304 stainless steel and has a mirror-polished finish for a custom look and long lasting shine.

PROTECT YOUR INVESTMENT AGAINST SCUFF MARKS, ABRASIONS, AND MINOR DAMAGE FROM TRAILERING

megawear stainless boat fiberglass keel keelguard keelgard repair steel marine anchor strong

Protect Your Boat's Gelcoat from Unsightly Marring Caused by Roller and Trailer Scuffs

Attaches Using The Highest Quality Materials And 3M Pressure-Sensitive Adhesives
Bend To Conform To Boat Hull
Made From Anti-Corrosive, 22-Gauge 304 Stainless Steel
Mirror Polished Finish For Long Lasting Shine


	Standard Bow Guard	Standard Bow Guard with Notch	Bow Guard XL	Bow Guard XL with Notch
Size	5.75" x 4.5"	5.75" x 4.5"	9" x 8.75"	9" x 8.75"
3M Adhesive	✓	✓	✓	✓
22-Gauge Stainless Steel	✓	✓	✓	✓
Mirror Polished	✓	✓	✓	✓

EASY DO-IT-YOURSELF APPLICATION IN 4 BASIC STEPS


1) Mark The Area Mark the boat hull area where the front trailer roller or V-brace touches the boat hull.	2) Clean & Etch Remove any fiberglass mold release agents, waxes or contaminants from the surface of the hull by cleaning it with Isopropyl Alcohol, Acetone, or Xylene. Do not use petroleum-based cleaners; they will leave a film and compromise the bond. To enhance the bonding process, lightly etch the area with a mild scotch-brite pad or 320 grit sand paper followed by the above-mentioned cleaning.	3) Position & Bend Leaving the protective liner on, position the ScuffBuster Bow Guard over the area you marked and carefully bend the ScuffBuster to fit the shape and curvature of the boat hull. It is recommended to OVER bend it slightly, by hand, so it hugs the hull. If your boat has strakes or chines that meet up to the center of the keel, you can use a rubber mallet to gently tap the material to form around the surface.	4) Remove Liner & Adhere Being careful not to touch the adhesive with your hands, remove the liner from the adhesive. Carefully place the ScuffBuster in position and apply firm pressure to activate the adhesive compounds. A rubber mallet can be used to gently tap the material and provide a closer fit to the hull. If desired, seal off moisture by applying a bead of 3M 5200 or similar adhesive around the outer edge of the ScuffBuster.

‏‏‎ ‎

IMPORTANT!

The ScuffBuster Bow Guard is best recommended on standard V-shaped bows that are smooth or have ONE curve. Multiple curves, radical strakes or chines and rivets will not allow the ScuffBuster to conform properly to the hull and achieve a full surface adhesive bond. This will result in adhesive failure.
Installation should not be performed when temperatures are below 60°F or 15°C otherwise the adhesive may not bond properly with the boat hull and will result in adhesive failure.
When working or bending this product, ALWAYS WEAR GLOVES to prevent injury to yourself and others. This product can and will cut your skin if not handled properly.
The ScuffBuster is not designed to prevent damage in the event of a collision impact. This product is designed to prevent scuff marks, abrasions and minor damage from trailering.
Installation instructions provided in the package must be strictly followed as to not compromise the full bonding capabilities of the 3M adhesive.

‏‏‎

PROTECT YOUR WATERCRAFT WITH PREMIER PRODUCTS FROM MEGAWARE

A Commitment to Excellence in Product Development and Quality Standards

Megaware KeelGuard developed the industry’s first patented, do-it-yourself keel protector in 1992. As a family owned and operated business, Megaware continues to lead the industry in engineering, design and quality with their premier line of products - Keel Guard, Pontoon Guard, Skeg Guard, Skeg Pro, Scuff Buster and the FlexStep Pro.

‎Through commitment to excellence in product development, quality standards, technology and customer support, Megaware KeelGuard has grown rapidly and is recognized as a worldwide supplier for the smallest fishing boats to the largest coast guard fleets.

As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

MEGAWARE ScuffBuster Boat Bow Guard Standard Notched - Stainless Steel

BEST SELLERS

Product introduction

Shipping Notices

Product Description

PROTECT YOUR INVESTMENT AGAINST SCUFF MARKS, ABRASIONS, AND MINOR DAMAGE FROM TRAILERING

Protect Your Boat's Gelcoat from Unsightly Marring Caused by Roller and Trailer Scuffs

Attaches Using The Highest Quality Materials And 3M Pressure-Sensitive Adhesives
Bend To Conform To Boat Hull
Made From Anti-Corrosive, 22-Gauge 304 Stainless Steel
Mirror Polished Finish For Long Lasting Shine


	Standard Bow Guard	Standard Bow Guard with Notch	Bow Guard XL	Bow Guard XL with Notch
Size	5.75" x 4.5"	5.75" x 4.5"	9" x 8.75"	9" x 8.75"
3M Adhesive	✓	✓	✓	✓
22-Gauge Stainless Steel	✓	✓	✓	✓
Mirror Polished	✓	✓	✓	✓

EASY DO-IT-YOURSELF APPLICATION IN 4 BASIC STEPS


1) Mark The Area Mark the boat hull area where the front trailer roller or V-brace touches the boat hull.	2) Clean & Etch Remove any fiberglass mold release agents, waxes or contaminants from the surface of the hull by cleaning it with Isopropyl Alcohol, Acetone, or Xylene. Do not use petroleum-based cleaners; they will leave a film and compromise the bond. To enhance the bonding process, lightly etch the area with a mild scotch-brite pad or 320 grit sand paper followed by the above-mentioned cleaning.	3) Position & Bend Leaving the protective liner on, position the ScuffBuster Bow Guard over the area you marked and carefully bend the ScuffBuster to fit the shape and curvature of the boat hull. It is recommended to OVER bend it slightly, by hand, so it hugs the hull. If your boat has strakes or chines that meet up to the center of the keel, you can use a rubber mallet to gently tap the material to form around the surface.	4) Remove Liner & Adhere Being careful not to touch the adhesive with your hands, remove the liner from the adhesive. Carefully place the ScuffBuster in position and apply firm pressure to activate the adhesive compounds. A rubber mallet can be used to gently tap the material and provide a closer fit to the hull. If desired, seal off moisture by applying a bead of 3M 5200 or similar adhesive around the outer edge of the ScuffBuster.

‏‏‎ ‎

IMPORTANT!

The ScuffBuster Bow Guard is best recommended on standard V-shaped bows that are smooth or have ONE curve. Multiple curves, radical strakes or chines and rivets will not allow the ScuffBuster to conform properly to the hull and achieve a full surface adhesive bond. This will result in adhesive failure.
Installation should not be performed when temperatures are below 60°F or 15°C otherwise the adhesive may not bond properly with the boat hull and will result in adhesive failure.
When working or bending this product, ALWAYS WEAR GLOVES to prevent injury to yourself and others. This product can and will cut your skin if not handled properly.
The ScuffBuster is not designed to prevent damage in the event of a collision impact. This product is designed to prevent scuff marks, abrasions and minor damage from trailering.
Installation instructions provided in the package must be strictly followed as to not compromise the full bonding capabilities of the 3M adhesive.

‏‏‎

PROTECT YOUR WATERCRAFT WITH PREMIER PRODUCTS FROM MEGAWARE

A Commitment to Excellence in Product Development and Quality Standards

As new technologies emerge, Megaware will incorporate these advancements to further enhance its line of cutting edge, easy-to-use products. Don’t trust your investment to anything less.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.